Media convertoare
Ultimode
ULTIMODE G-10G/SFP+ media converter
Cod: L1307
ULTIMODE G-10G/SFP+ media converter with interchangeable fiber optic modules allows you to change the medium carrying the data stream from standard STP/UTP twisted pair cable to fiber optic cable via SFP module.
The ULTIMODE G-10G/SFP+ media converter is ready for operation after installing
ULTIMODE G-10G/SFP+ media converter is equipped with an SFP+ slot, which makes it possible to work with multimode and single-mode optical fibers, depending on the selected module. The media converter works with SFP+ inserts with a speed of 10 Gbps. Do not use inserts with lower speeds.
The G-10G/SFP+ media converter has a built-in MDI/MDIX auto-detection function, so it does not require the use of patch cables and automatically detects and sets the speed and mode of data transmission. It works based on the "store and forward" principle that validates all received data by calculating checksums.
Key features:
- Ethernet transmission 100/1000/2500/10000 Mbps in the electrical port
- SFP+ slot
- LEDs indicating correct operation of the device
- Very easy installation (plug and play)
- Power supply included
Specifications:
Product: | ULTIMODE G-10G/SFP+ |
Code: | L1307 |
Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z |
LAN port: | 100/1000/2500/10000 Mbps |
RJ-45 UTP/STP, cat. 6A. 100m | |
Optical port: | SFP+ |
Transmission rate: | module dependent |
Power supply: | 5 VDC/1 A |
Operating temperature: | 0... 60oC |
NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
ULTIMODE G-10G/SFP+ media converter
Cod: L1307