Română
Polski
English
Česky
Deutsch
Irish
Magyar
Português
Slovenský
298,88 Lei
| Preţ cu TVA | Rabat | Cant. | Validitate |
|---|---|---|---|
| 298,88 Lei | 0 % | de la 1 buc. |
Disponibil
Switch-ul PoE TL-SG1008P este un dispozitiv care permite transmiterea datelor in reţele Ethernet 10/100/1000 Mbps. Switch-ul are opt porturi RJ45 care suportă funcţia de auto-negociere iar patru dintre acestea oferă şi funcţia Power over Ethernet (PoE). Switch-ul detectează automat dispozitivele compatibile cu standardul IEEE 802.3af şi le alimentează cu energie electrică. Datorită acestei caracteristici utilizatorul poate să extindă acoperirea reţelei în zonele în care nu există acces la liniile electrice pentru a monta access point-uri, camere IP, telefoane IP, etc.
Detalii
Front view
Rear view
The included accessories
View of the packaging
The PoE switch TL-SG1008P is a desktop device enabling smooth data transmission in 10/100/1000 Mbps Ethernet networks. Its eight RJ45 ports support auto-negotiation function, four of them provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 802.3af standard and provides them with power supply. This feature allows the user to expand the network coverage in areas where there is no access to AC power lines/outlets and to employ access points, IP cameras, IP phones, etc.
The switch has the priority* function which helps protect main functions of the system in case of overloading. The maximum power consumption (by all the PoE devices) cannot exceed 53 W. In case of overloading, the switch will cut off the power to devices connected to ports with lower priority.
* Remark: order of priority: port-1 > port-2 > port-3 > port-4. This feature ensures an interrupted power supply for the most important PoE components of the system in case of overloading (they should use the PoE ports with lower numbers).
An example: ports 1,2 and 4 provide 15.4 W each (the maximum values), giving in total 46.2 W (PoE LED lights up red). After connecting another device (consuming e.g. 10 W) to the port 3, the switch cuts off power to the port 4 (for the device with the lowest priority), to preserve the total power capacity of 53 W.
An example: ports 1,2 and 4 provide 15.4 W each (the maximum values), giving in total 46.2 W (PoE LED lights up red). After connecting another device (consuming e.g. 10 W) to the port 3, the switch cuts off power to the port 4 (for the device with the lowest priority), to preserve the total power capacity of 53 W.
The TL-SG1008P switch is easy to install and use. It requires no installation or configuration. This desktop device is a great selection for expanding home or office network, especially when there is a need to use PoE equipment.
Distinguishing features:
- Four PoE ports (each of them ensuring communication and power supply for a network device via a single UTP cable)
- No need for installation or configuration
- Max capacity of each PoE port: 15.4 W
- Total PoE capacity: 53 W
- Support for (PD) PoE devices compliant with IEEE802.3af standard
- Support for bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex mode
- Support for auto-learning and auto-aging, 8k MAC address entries
- LED indicators providing information on status/speed/activity/PoE
Specifications:
| Name | TP-LINK TL-SG1008P |
| Code | N29931 |
| Standards and protocols | IEEE802.3, 802.3u, 802.3ab, 802.3x CSMA/CD, TCP/IP |
| Core functions/features | Gigabit Ethernet switch |
| Support for PoE (PD) devices compliant with IEEE 802.3af standard | |
| Auto-learning and auto-aging (8k MAC address entries) | |
| Support for bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex mode | |
| Internal data throughput | 16 Gb/s |
| MAC table | 8k |
| Ports | 8 x RJ45 10/100/1000 Mb/s (auto-negotiation; auto MDI/MDIX) |
| Transmission mechanism | Store-and-Forward |
| Ports | 8 x RJ45 10/100Mb/s (auto-negotiation, auto MDI/MDIX) |
| Cabling requirements |
|
| LED indicators | Power, Link/Act, 1000M, PoE Status, PoE MAX |
| Certificates | FCC, CE |
| Dimensions [mm] | 171x98x27 |
| Environment |
|
| Power | 230 VAC / 48 VDC (1.25A) |
Specificații
| Nume | Comutare PoE TP-Link TL-SG1008P 8 × GE (4 × PoE) | ||
| Model | TL-SG1008P | ||
| Utilizare | Comutator pentru acasa, Switch PoE | ||
| Producător | TP-Link | ||
| Interfețe | |||
| porturi Ethernet | număr porturi | 8 | |
| tip porturi | Gigabit Ethernet | ||
| 10/100/1000 Mbps | 8 | ||
| PoE 10/100/1000 MBps | 4 | ||
| Port de consolă | Nu | ||
| Performanță | |||
| Lățimea de bandă | Gbps | 16 | |
| Rata de expediere a pachetelor | Mbps | ||
| tabel de adrese MAC | 4K | ||
| Cadru Jumbo | kB | 16 | |
| Proprietăți PoE | |||
| PoE | Da | ||
| Standard PoE | 802.3af, 802.3at | ||
| Putere ieșire | W | 64 | |
| Putere maximă per port | W | 30 | |
| Prioritate pentru portul PoE | Nu | ||
| Program PoE | Nu | ||
| Modul extindere | Nu | ||
| Proprietățile dispozitivului | |||
| Consum maxim de energie | W | 75 | |
| Alimentare | DC | V | |
| Numărul de ventilatoare | Fără | ||
| Dimensiuni | mm | 171 × 98 × 27 | |
| Montare | Desktop | ||
| Alimentare redundantă | Nu | ||
| Certificate | CE/FCC | ||
| Continutul pachetului | Manual, Switch, Alimentare electrică | ||
| Mediul de funcționare | |||
| Temperatură | funcționare | ℃ | 0...+40 |
| depozitare | ℃ | -40...+70 | |
| Umiditate | aer | 10...90 | |
| depozitare | 5...90 | ||
Produse conexe
