View of the mount

Dimensions

The KMA20-221 KMA20-220 E93331 bracket has been designed to place a modern OLED/LCD monitor on a wall. Its load capacity is 25 kg. The wall mount allows easy adjustment of tilt in the range of-12^o to +3^o and rotation from -90^o to 90^o. The monitor distance from the wall is 65 to 200 mm.

The mount has been tested for endurance. During the test, the actual load was 3 times greater than the rated load capacity. After a series of 5000 movements, the structure of the joints did not show excessive wear.

If you are uncertain about the strength of the wall, consult a professional installation company.

The set contains all components needed for typical installation. In some specific conditions, other elements or tools may be required. These should be supplied by professionals installing this type of hardware.

The set includes assembly instructions. If you do not understand them, or have any doubts about the safety of the installation, please contact a qualified installer.

Before mounting, please check carefully to make sure there are no missing or defective parts. If you have any doubts, do not proceed with the installation.

Improper installation may cause damage or serious injury.

Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for any damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.