COŞUL MEU
Coşul este gol

Conectică

Protecţii alimentare

Set protecție supratensiuni Signal ZPZ-12 (12 căi, pentru sisteme multiswitch)
Cod: R48612
Preţ fără TVAPreţ cu TVARabatValiditate  
587,11 Lei698,66 Lei0 %
Garanție 2 ani
Înlocuitori
R48606Cutie de protecţie la supratensiune - Signal (12 coax, pt. instalații multiswitch)
R48614
R48615
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Front view
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Bottom view.
Cables are inserted into the box through the elastomer cable glands.
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
The box contains 12 Signal surge protectors with F-m to F-f adapters
Signal ZPZ-12 surge protection installation box R48612 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (12) against voltage surges induced in signal lines by lightning strokes.
The box has been equipped with 12 Signal TV-Sat surge protectors R48602 that can protect:
  • satellite paths from 2 satellites (8 coaxial lines - 4 polarization-band pairs from each satellite),
  • 2 terrestrial radio paths (FM, DAB),
  • 2 DVB-T paths (UHF1, UHF2).
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Typical application in a SMATV system
Key features
  • 12 surge protectors for 12 signal lines,
  • for outdoor or indoor use, made of PA 11 aluminum alloy, powder-painted in RAL 7035,
  • sealed and earthed door, mounted on two hinges, closed with a cylinder lock,
  • wall- mounted,
  • holes for cables with elastomer cable glands,
  • grounding connector (6 mm diameter, with cable eyelet),
  • cardboard packaging.
The box should be used at the input of a SMATV system, between antennas and the first active components (usually SAT/TV amplifiers). The box has to be grounded pursuant to the applicable regulations.
The construction of the box allows for the use of different types of F connectors and easy organization of coaxial cables. The recommended cable for connecting the protectors with antenna equipment is Triset-113 PE E1017, the best F-connectors are MASTER F 113 E80342. The output cables can also be Triset-113 PE E1017, or - in the case of long distances - Triset-11 PE E1025 (terminated with MASTER 11 E80362 F connectors).
Specifications
NameSurge Protection Installation Box Signal ZPZ-12
CodeR48612
Number of surge protectors12
Mounting
To a wall, 4 holes with 5.6 mm diameter, 234x180 rectangular base
Cable routing method
Top to bottom
Input/output connectors
F-f
Working environmentIndoor/outdoor
Number of input holes (glands)
12
Number of output holes (glands)
12
Diameter of input/output holes [mm]16.5
Cable glands
24; PDEN 16M thermoplastic TPE elastomer, for 5-11 mm cables
Box material
PA 11 aluminum alloy
Finishing
RAL 7035
Door
Grounded, rubber gasket in the body, two hinges, cylinder lock
Grounding connector
Yes, diam. 6 mm, cable eyelet
Dimensions [mm]305x250x110
Weight [kg]2.0
Surge protector paths
Operating band [MHz]5 - 2400
Inputs
F-f
Outputs (via the installed adapters)
F-f
Insertion loss [dB]typ. 0.8 at 1 GHz
typ. 1.2 at 2 GHz
Return loss [dB]typ. 12
Maximum current (8/20 µs) [kA]8
Impedance [Ω]75
DC pass-throughYes
DC breakdown voltage at 100 V/s [V]230 +/-42
Screening efficiency [dB]> 90 (EN 50083-2/A1; A class)
Protection level at 1 kV/µs [V]≤ 800
Preţ fără TVAPreţ cu TVARabatValiditate  
587,11 Lei698,66 Lei0 %
Înlocuitori
R48606Cutie de protecţie la supratensiune - Signal (12 coax, pt. instalații multiswitch)
R48614
R48615
 
Set protecție supratensiuni Signal ZPZ-12 (12 căi, pentru sisteme multiswitch)
Cod: R48612
George Popescu
Consiliere clienţi
COMPLETAŢI
BIBLIOTECA
Nou în bibliotecă
RECOMANDĂRI
 
Regulamentul | Garanție | Reclamaţii | Download
| Cookies | Politica de confidentialitate Toate drepturile rezervate © 1996-2023 DIPOL sp.j.