Senzor PIR+MW dual SATEL SILVER tehnologie ANTIMASK

Cod: G3005
Retras din ofertă
Ofertă: Bibliotecă: ,

Suport tehnic

Detalii

Senzor PIR+MW dual SATEL SILVER tehnologie ANTIMASK
The dual motion detector combining PIR and microwave detection is designed to protect premises with adverse conditions such as drafts or intense convection. This makes it an excellent proposal for the protection of rooms with fireplaces or heating with forced air flow, where the aesthetics of the installation is as important as its reliability.
The SATEL SILVER motion detector features high sensitivity combined with great resilience to interference and false alarms. Thanks to the use of a combination of two detectors, 10.5 GHz microwave (MW) and double passive infrared (PIR), it can detect intruders masked against detection by typical PIR sensors. The anti-masking function is performed by the microwave detector that detects an attempt of masking against the PIR detector. The technologically advanced device encompasses the both detection systems in a comparatively small housing. The detector uses an advanced signal processor with the high resolution sensors. The mechanism of digital temperature compensation enables work in a wide temperature range. Additional advantages of the detector include the alarm memory and the ability to run a special test mode, allowing individual checking of the microwave or infrared path.
Thanks to the dual infrared and microwave technology of motion detection, the SATEL SILVER motion sensor is very reliable. It does not cause false alarms generated e.g. by a flow of cold air from ventilation ducts or hot air from fireplace, radiators, boilers etc. The sensor is often used in boiler rooms, garages, halls, corridors.
SATEL SILVER can operate in two modes, basic or advanced. In advanced mode, the sensor can detect an intruder masked against detection by the PIR detector.
In the basic mode of operation, the detector generates an alarm only if motion is detected by both sensors. The first system (PIR or MW), which detects motion, activates a 3-second period of time during which the second sensor must also detect movement to generate an alarm. If within 3 seconds after the first sensor detects movement, the second one does not confirm the alarm state, the detector will not generate an alarm.
In advanced mode, the sensor generates alarm in the following situations:
  • motion has been detected by both sensors, like in basic mode,
  • the MW sensor detected 16 events in a period shorter than 15 minutes, although PIR does not detect anything,
  • the MW sensor detected intense motion, but the level provided by the PIR sensor did not exceed the alarm level of the basic mode (it can suggest an attempt of masking against detection by the PIR sensor).
Notice: The sensitivity of the microwave section has to be adjusted to the environment, as microwaves can pass through gypsum walls, doors, etc., which may generate false alarms.
Key features
  • passive infrared detector (PIR) and 10.5 GHz microwave detector (MW)
  • compliance with EN50131 Grade 2
  • advanced digital motion detection algorithm
  • anti-masking function performed by the MW path
  • precise Fresnel lens
  • digital temperature compensation
  • remotely triggered test mode
  • possibility of independent testing of detectors
  • alarm memory
  • adjustable mount
Specifications
Name SATEL SILVER
Code G3005
Supply voltage
12 VDC +/-15%
Recommended installation height 2.4 m
Current consumption (armed)
18 mA
Max current consumption
25 mA
MW operating frequency
10.525 GHz
Alarm period
2 s
Alarm period (masking attempt detection)
5 s
Detectable motion speed 0.3…3 m/s
Environmental class according to EN50130-5 II
Protection level according to EN50131-2-4Grade 2
Weight 0.13 kg
Operating temperature range
-30°C…+55°C
Max humidity
93±3%
Dimensions 62x136x49 mm

 

Specificații

Model ARGINTIU
Tip produs Detector de alarmă
Producător Satel
Tip Cablat
Culoare Alb
Materialul carcasei Plastic
Compatibilitate Sistem cablat
Parametri
Căi detectare PIR+MW
Piroelement Dublu
Montaj Interior
Înălțime de montare recomandată m 2,4
Raza de detecție maximă Lungime m 18
Lăţime m 12
Unghiul de detectare ° 88
Rezistoare parametrice încorporate Da
Rezistenţă kOhm 2 × 1.1
Frecventă microunde GHz 10,525
Detectarea vitezei de mișcare m/s 0.3...3
Indicator LED pentru semnalizare Da
Număr de culori ale indicatorului LED 1
Algoritm de detectare digitală Da
Compensare digitală a temperaturii Da
Protectie Tamper Da
Alții
Tensiunea de alimentare DC V 12 +/-15%
Consum în standby mA 18
Consum maxim de curent mA 25
Clasă mediu II
Grad de protecție Gradul II
Conform cu standardele EN 50131-2-4, EN50130-4, EN50130-5, EN50131-1
Temp. funcționare °C -30...+55
Umiditate maximă % 93 +/-3
Dimensiuni mm 62 × 136 × 49
Greutate kg 0,13