Quadruple Indoor A/V Receiver: CAM5816 Multi-Rx 5.8GHz
Cod: M1561
Retras din ofertă
The quadruple CAM5816 Multi-Rx receiver allows to reduce the number of devices in a multi-camera wireless CCTV system, replacing four single receivers. It should be particularly emphasized that this innovative solution is a response to the wishes of many customers.
CAM5816 Multi-Rx receives analog signals within band divided into 16 channels, in real time, without any delays. By using precise microwave circuits it ensures high parameters of video and audio transmission. Additional antenna amplifier can increase the range of transmission. The receiver has one antenna input allowing for simultaneous reception of four PAL video channels and eight audio signals. Omnidirectional antenna can receive signals from all directions (360 degrees). If the signals are transmitted from one direction, there is the possibility of using directional antenna - AK19, which will increase the range of the wireless system. Each output can provide signal from any available channel.
Distinguishing features
- 4 video and 8 audio outputs
- 16 channels
- each output can provide signal from any available channel
- surge protection of power circuit
- indoor or outdoor version (IP65)
- cooperation with all CAM transmitters
Specifications
Name | CAM5816Multi-Rx 5.8GHz |
Code | M1561 |
Frequency range | 5725...5875 MHz |
Number of supported transmitters | 4 |
Signals received from each transmitter | 1 video + 2 audio |
Sensitivity | -87 dBm |
Antenna input impedance | 50 Ω |
Modulation | FM |
Number of available chnnels | 16 |
Video system | PAL |
Video outputs | 4x 75Ω BNC |
Audio output impedance | 600 Ω |
Audio banwidth | 15 kHz |
Power | 9...14 VDC, 800 mA |
Operating temperature range | 0...+55°C |
Application | indoor use |
Example sets of devices:
Notice: The antenna of the receiver has to "see" the antennas of transmitters.
Retras din ofertă
Quadruple Indoor A/V Receiver: CAM5816 Multi-Rx 5.8GHz
Cod: M1561
Nou în bibliotecă
RECOMANDĂRI