NVR IP: NVR IP Hikvision AcuSense DS-7608NXI-K1 (8 canale, 80 Mbps, 1 x SATA, HDMI, VGA, H.265)

Cod: K22069
507,31 Lei
Preţ cu TVA Rabat Cant. Validitate
507,31 Lei 0 % de la 1 buc.
Disponibil
Hikvision DS-7608NXI-K1 este un reportofon IP modern cu 8 canale, care înregistrează imagini de la camerele IP cu o rezoluție de 12 MP.
• Înregistrare la rezoluție de până la 12 MP
• Ieșiri HDMI/VGA independente
• Lățimea de bandă maximă de intrare/ieșire – 80/80 Mbps
• Suport pentru până la 8 camere IP de la Hikvision sau alți producători prin Onvif
• Suport pentru 1 unitate SATA de până la 10 TB
• Funcții AI implementate de NVR: detectarea feței (1 canal), compararea feței (4 canale) sau detectarea mișcării 2. 0 (2 canale) sau AcuSense (2 canale)
• Suport pentru camere cu AcuSense și detectarea mișcării 2.0 pe toate canalele (filtru uman/vehicul)
• Bibliotecă foto fețe (16 biblioteci, până la 2.000 de fotografii în total, dimensiune maximă a fotografiei 4 MB, capacitate totală 1 GB)
• Suport pentru cameră cu analiză VCA încorporată (linie virtuală, detectare a intruziunilor etc.)
• Compresie H.265 (+)/H.264 (+)/MPEG4 acceptată
• Suport funcție: ANR
• I/O audio pentru comunicare în două sensuri
• 2 x USB 2.0
• Porturi Ethernet: 1 x Rj-45 10/100/1000 Mb/s
• Aplicație pentru un PC iVMS-4200 și smartphone Hik-Connect (Andriod, iOS)
• Acces prin cloud P2P

Garanție

Garanție 2 ani.

Suport tehnic

Detalii

Hikvision DS-7608NXI-K1 este un modern -registror IP cu 8 canale, care înregistrează imagini de la camere IP cu o rezoluție de 12 MP+. Ieșirile independente HDMI și VGA vă permit să conectați două monitoare. Vizualizarea pe fiecare ieșire poate fi configurată independent, sunt posibile diferite diviziuni de ferestre și imaginea de la orice cameră poate fi afișată pe fiecare dintre ele. 1 port SATA permite conectarea hard disk-urilor cu o capacitate de până la 10 TB. Dacă memoria este plină, se declanșează suprascrierea automată pentru a preveni pierderea celor mai recente date. Porturile USB încorporate vă permit să conectați o unitate flash USB sau un disc extern și să copiați anumite fragmente pe suporturi de date externe.

The NVR has the function of capturing and comparing faces in 1 channel or comparing faces in 4 channels. It is possible to create up to 16 libraries of faces on the basis of which searching, comparing and triggering alarm actions such as controlling the alarm output, activating the sounder or sending an e-mail in case of correct or incorrect comparison of detected faces is possible.
NOTĂ! Versiunea actuală a software-ului este disponibilă Aici!
+++ Caracteristici cheie:++
  • Recording resolution up to 12 MP,
  • Independent HDMI/VGA outputs,
  • Maximum input/output bandwidth – 80/80 Mbps,
  • Support for up to 8 Hikvision or other manufacturers’ IP cameras via Onvif,
  • Support for 1 SATA drive up to 10 TB, *AI functions supported: face detection (1 kanał), face comparison (4 channels) or motion detection 2.0 (2 channels) or AcuSense (2 channels),
  • Supporting cameras with AcuSense and motion detection 2.0 in all channels (human/vehicle filter),
  • Face photo library (16 libraries, up to 2000 photos, max. photo size 4 MB, total capacity 1 GB),
  • Support for cameras with built-in VCA analysis (virtual line, intrusion detection, etc.),
  • Supported compression H.265 (+) / H.264 (+)/MPEG4,
  • Function support: ANR,
  • Audio I/O for two-way communication,
  • 2 x USB 2.0,
  • Ethernet ports: 1 x Rj-45 10/100/1000 Mb/s,
  • Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS),
  • Access via P2P.


NOTE! Motion detection 2.0, perimeter protection (AcuSense) and face analysis cannot operate simultaneously if these functions are implemented by the DVR. Cameras with AcuSense and motion detection 2.0 can be operated independently on all channels.
Face detection, comparison and search
The DVR has a function to capture and analyze faces on a certain number of channels. It is possible to create libraries of faces that will later be used to search the recordings. Related actions can also be specified that will be executed in case of a correct or incorrect comparison between a detected face and a face that is in the library, such as triggering a beep in the recorder, an alarm in the monitoring center, sending an e-mail, controlling an alarm output, etc. Faces, already recorded on the DVR or from an external source, can be added to the library. Recordings stored on the DVR, can be easily and quickly searched after pointing to a specific face, on channels on which the face recording and comparison function was active.
Motion detection 2.0 - classification of human/vehicle type objects
The DVR can be connected to all channels with cameras equipped with the motion detection 2.0 algorithm. It allows to effectively reduce the number of false alarms thanks to the classification of human and vehicle type objects. Recordings stored on the DVR, can be easily and quickly searched for human or vehicle type criteria. If cameras with a traditional motion detection algorithm are connected to the DVR their functionality can be extended by the DVR to motion detection 2.0 in the number of channels indicated in the specifications of a particular model.
Perimeter protection (VCA) with AcuSense - human/vehicle object classification
The DVR supports perimetric protection in the form of VCA events (e.g., line crossing, intrusion detection, entering and exiting an area) generated by Hikvision IP cameras, which is enhanced with AcuSense technology. The protection can be supported on all channels if AcuSense cameras are connected, or implemented by the DVR on the number of channels specified in the DVR specification if regular IP cameras are connected. Perimeter protection ensures early detection of people who intend to violate the protected area. When building a security system, its resistance to false alarms, triggered by e.g. animals, moving trees, leaves, shadows, weather conditions, etc. is extremely important. Ideal for such surveillance applications are cameras and recorders with the AcuSense technology which analyzes objects based on the Deep Learning algorithm, considering events meeting certain criteria as real threats.
H.265 (+) compression
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
H.265/H.265+ - rate de compresie mai mari cu păstrarea calității video oferite de H.264
iVMS-4200 client software
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
Pagina de conectare a software-ului client iVMS-4200 (v3).
Access via P2P cloud - Hik-Connect application
A mobile application Hik-Connect is dedicated to operate Hikvision devices using cell phones with the operating system Android or iOS. It can be used to remotely view live video from DVR, NVR, network cameras, video intercoms using Wi-Fi, 2G or 3G networks as well as to view recorded video. Video intercoms can be operated with the application which additionally allows for remote opening of electric doors, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the resident. The application supports connectivity via IP and the P2P cloud. Hik-Connect is also the name of a cloud-based service that allows access to devices in the absence of an external IP address.

Continuity of recordings guaranteed thanks to the ANR function
The image from the IP camera is sent to the recorder as a data stream. Thanks to the support of the ANR (Automatic Network Replenishment) function, the Hikvision IP camera equipped with a microSD card can save recordings on it in the event of network failure, i.e. problems with communication between the camera and the recorder. After the problem is solved, the recordings are automatically synchronized with the recorder and marked with a different color on the playback bar. Such a solution guarantees the continuity of recordings and boosts the entire system performance.
Extensive applications for the organization and use of CCTV systems
Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.

Fereastra principală a software-ului SADP
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.

Specificații

Model DS-7608NXI-K1
Tip produs NVR
tip Standard
Producător Hikvision
Serie Seria NXI-K AcuSense, Standard
Parametri
Nr. canale 8
Bandă funcționare Intrare MBps 80
Ieșire MBps 80
Moduri de ieșire HDMI 1/VGA 1 Independent
Rezoluție maximă de ieșire HDMI 1 px 4K (3840 × 2160)
VGA 1 px 1920 × 1080
Codare/decodare standarde de compresie H.265+, H.265, H.264+, H.264
rezoluție maximă de înregistrare MP 12
redare sincronă 8 canale
rezolutie maximă de decodare AI pornit: 1 canal 12 MP, 1 canal 8 MP, 3 canale 4 MP, 6 canale 1080p. AI oprit: 1 canale 12 MP, 2 canale 8 MP, 4 canale 4 MP, 8 canale 1080p
HDD Nr. interfețe SATA 1
Capacitate maximă pe fiecare HDD TB 10
USB 2
Audio bidirecțional Da
Audio Intrare 1, RCA (2.0 Vp-p, 1 kOhm)
Ieșire 1, RCA (linear, 1 kOhm)
Intrări/ieșiri de alarmă Nu
Ethernet 1 × RJ-45 10/100/1000 Base-T
Comutator PoE încorporat Nu
Aplicații iVMS-4200, Hik-Connect, Hik-Central
Arhivare USB, Telecomandă
Protocoale de rețea DDNS, DHCP, DNS, HTTP, HTTPS, IPv4, IPv6, iSCSI, ISUPI, NFS, NTP, RTSP, SADP, SMTP, SNMP, TCP/IP, UPnP
Funcții inteligente
AcuSense filtru alarme false pe 1 canal pentru camere fără AcuSense (max. 4 MP), pe toate canalele pentru camerele cu funcție AcuSense
Detectarea mișcării 2.0 filtru alarme false pe toate canalele pentru camerele IP Hikvision fără detectarea mișcării 2.0 (max. 4 MP sau 8 MP când SVC este activat), pe toate canalele pentru camerele cu funcția de detectare a mișcării 2.0
Recunoaștere facială fototeca de fețe 16 biblioteci
fototeca de fețe 20000 de fotografii
Analiza si detectarea feței Comparație foto a feței, , Căutarea imaginilor feței
Comparație foto a feței 4 canale
analiza feței și eficacitatea detectării Captură feței pe 1 canal (camera de până la 8 MP, H.264/H.265)
NOTĂ! Detectarea mișcării 2.0, protecția perimetrului (AcuSense) și analiza feței nu pot funcționa simultan dacă aceste funcții sunt implementate de DVR. Camerele cu AcuSense și motion detection 2.0 pot fi operate independent pe toate canalele.
Suport pentru detectarea mișcării și funcții VCA Da
Funcții suplimentare ANR
Alții
Alimentare electrică DC V 12
DC W max. 18
Temp. funcționare °C -10...55
Umiditate admisă 10 la 90
Dimensiuni (L × A × Î) mm 320 × 240 × 48
Greutate kg