NVR 8 canale 4K Hikvision DS-7608NXI-I2/S(C) 80 Mbps, 2xSATA, 4xAcuSense, detecție facială, H.265

Cod: K22097
2055,92 Lei
Preţ cu TVA Rabat Cant. Validitate
2055,92 Lei 0 % de la 1 buc.
Disponibil
NVR 4K 16 canale Hikvision DS-7608NXI-I2/S(C) (160 Mbps, 2xSATA, 4xAcuSense, VGA, HDMI, BNC, H.265)
• Rezoluția de înregistrare până la 12 MP
• Rezoluția ieșirilor video independente: HDMI până la 4K @ 30Hz sau 2K (1080p) 30/60 Hz, VGA până la 1080p @ 60 Hz
• ieșire video BNC 4CIF,
• Lățime maximă de bandă totală (intrare / ieșire): 160/256 Mb/s,
• Suport pentru până la 16 camere IP (compatibile cu Hikvision sau ONVIF)
• Spațiu pentru 2 HDD-uri SATA, fiecare de pana la 8 TB
• AcuSense în 4 canale (pentru camere fără funcția AcuSense),
• Suportă camere AcuSense pe toate canalele,
• Funcții AI: protecție perimetrală, recunoaștere facială, clasificare obiect (om, vehicul),
• Suportă camere cu VCA incorporat,
• Suportă compresie H.265 (+)/H.264 (+)/MPEG4,
• Suportă funcții: ANR, POS (funcționare cu case de marcat),
• Audio I/O duplex,
• Intrări ieșiri alarmă: 4/1,
• 1 x USB 2.0, 1 x USB 3.0,
• Porturi ethernet: 2 x Rj-45 10/100/1000 Mb/s,
• Program management PC iVMS-4200
• Acces prin P2P

Garanție

Garanție 2 ani.

Suport tehnic

Detalii

Hikvision DS-7608NXI-I2/S(E) is a modern 8-channel IP recorder, recording image from IP cameras with a resolution of 32 MP. Independent HDMI (resolution up to 4K) and VGA (resolution up to 1080p) allow you to connect two monitors. The view on each output can be configured independently, different window divisions and are possible and the image from any camera can be displayed on each of them. 2 SATA ports enable connection of hard drives with a capacity of up to 14 TB each. If the memory is full, automatic overwriting is triggered to prevent the loss of the latest data. The built-in USB ports allow you to connect a USB flash drive or external disk and copy specific fragments to external data carriers.
The recorder supports the Motion detection 2.0 and AcuSense technology, which allows you to filter human/vehicle type objects. It can support motion detection 2.0 cameras or implement this functionality on all channels when connecting regular Hikvision IP cameras. Perimeter protection with human/vehicle object filtering function can be supported on all channels when connected to cameras with AcuSense functionality, and can be implemented by the NVR on 4 channels when connected to a regular IP camera with up to 2 MP resolution. Thanks to accurate recognition capability, the system can filter out almost all false alarms. The recorder has also the option of face analysis and detection, which can work in 4 channels. It is possible to create up to 16 face libraries based on which the control will be performed. The ability to compare faces allows you to quickly find a specific person (perimeter protection and face analysis cannot work in parallel). Support for cameras dedicated to identifying license plates ANPR, PTZ cameras, VCA analysis and the possibility of integration with cash registers using POS allows the recorder to be used for projects with various advancement levels. Intelligent options for searching and analyzing recordings allow you to quickly extract a fragment of interest from the recorded footage.
NOTE! Current software is available
here
Key features:
  • Recording at up to 32 MP,
  • Video outputs: 1 × HDMI, 1 × VGA, 1 × BNC (HDMI and VGA independent),
  • Maximum input/output bandwidth 80/256 Mbps,
  • Support ut to 8 IP cameras from Hikvision or other manufacturers via Onvif,
  • Support of up to 2 SATA drives up to 14 TB each,
  • AI functions implemented by the NVR: face detection and comparison (4 channels) or motion detection 2.0 (8 channels – Hikvision IP cameras) or AcuSense (4 channels),
  • Face comparison if the capture function is implemented by cameras: 8 channels,
  • Support for cameras with AcuSense and motion detection 2.0 on all channels (human/vehicle filter),
  • Face image library (16 libraries, up to 50,000 images in total),
  • Support for cameras with built-in VCA anatytics (perimeter protection), ANPR, counting analytics,
  • Supported H.265 (+)/H.264 (+) compression,
  • Function support: ANR,
  • Audio I/O for two-way communication,
  • Alarm I/O: 4/1,
  • 1 × USB 2.0, 1 × USB 3.0,
  • Ethernet ports: 2 × Rj-45 10/100/1000 Mb/s,
  • Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS),
  • Access via P2P.
Specifications:
Model DS-7608NXI-I2/S(E)
Product type IP recorder
Type Standard
Brand Hikvision
Series NXI-I AcuSense series
Parameters
Number of channels 8
Operating band input Mbps 80
output Mbps 256
Output modes HDMI/VGA Independent
Max. output resolution HDMI 1 px 4K (3840 × 2160)
VGA px 1920 × 1080
BNC px 704 × 576
Coding/decoding compression standards H.265+, H.265, H.264+, H.264
max. recording resolution MP 32/24 (on 4 channels)
two stream recording Yes
synchronous playback 8 channels
max. decoding resolution 20 channels 1080p (AI enabled), 32 kanały 1080p (AI enabled)
HDD Number of SATA interfaces 2
Number of eSATA interfaces 1
max. capacity of each HDD TB 14
USB 2.0 1
3.0 1
Two-way audio Yes
Audio input 1, RCA (2.0 Vp-p, 1 kOhm)
output 1, RCA (linear, 1 kOhm)
Alarm inputs/outputs Yes
Alarm input 4
output 1
Ethernet 2 × RJ-45 10/100/1000
Built in PoE switch No
Applications Hik-Connect, iVMS-4200, Hik-Central
Archiving USB, remote
Network protocols DHCP, DNS, HTTP, HTTPS, IPv4, IPv6, iSCSI, ISUPI, NFS, NTP, RTSP, SADP, SMTP, SNMP, TCP/IP, UPnP, DDNS, ISUP
Smart functions
AcuSense false alarm filter on 4 channels for cameras without AcuSense (max. 2 MP, H.265, H.264 video compression)
Motion detection 2.0 false alarm filter on all channels for IP Hikvision cameras
Face recognition face photo library 16 libraries
face photo library 50000 photos
face analysis and detection Face photo comparison, face capture, face photo search
face photo comparison 8 channels
face analysis and detection effectiveness 4-channel face capture and comparison on 4 channels (camera up to 2 MP, H.264/H.265)
NOTE! Face detection and people/vehicle classification cannot be enabled at the same time. Enabling one function will make the other one unavailable
Support for motion detection and VCA functions Yes
Support for cameras with analytical functions Motion detection 2.0, VCA, people counting, ANPR
Additional functions ANR, POS
Power supply VDC V 12
Current drawn (no HDD and PoE) W max. 30
Operating temperature °C -10...+55
Permissible humidity % 10 to 90
Rack mounting Yes
Height U 1
Dimensions (W × D × H) mm 385 × 317 × 52
Weight kg 3.2


NOTE! Motion detection 2.0, perimeter protection (AcuSense) and face analysis cannot operate simultaneously if these functions are implemented by the DVR. Cameras with AcuSense and motion detection 2.0 can be operated independently on all channels.
Face detection, comparison and search
The NVR has a function to capture and analyze faces on a certain number of channels. It is possible to create libraries of faces that will later be used to search the recordings. Related actions can also be specified that will be executed in case of a correct or incorrect comparison between a detected face and a face that is in the library, such as triggering a beep in the recorder, an alarm in the monitoring center, sending an e-mail, controlling an alarm output, etc. Faces, already recorded on the DVR or from an external source, can be added to the library. Recordings stored on the DVR, can be easily and quickly searched after pointing to a specific face, on channels on which the face recording and comparison function was active.
Motion detection 2.0 - classification of human/vehicle type objects
The NVR can be connected to all channels with cameras equipped with the motion detection 2.0 algorithm. It allows to effectively reduce the number of false alarms thanks to the classification of human and vehicle type objects. Recordings stored on the DVR, can be easily and quickly searched for human or vehicle type criteria. If cameras with a traditional motion detection algorithm are connected to the DVR their functionality can be extended by the DVR to motion detection 2.0 in the number of channels indicated in the specifications of a particular model.
Perimeter protection (VCA) with AcuSense - human/vehicle object classification
The NVR supports perimetric protection in the form of VCA events (e.g., line crossing, intrusion detection, entering and exiting an area) generated by Hikvision IP cameras, which is enhanced with AcuSense technology. The protection can be supported on all channels if AcuSense cameras are connected, or implemented by the DVR on the number of channels specified in the DVR specification if regular IP cameras are connected. Perimeter protection ensures early detection of people who intend to violate the protected area. When building a security system, its resistance to false alarms, triggered by e.g. animals, moving trees, leaves, shadows, weather conditions, etc. is extremely important. Ideal for such surveillance applications are cameras and recorders with the AcuSense technology which analyzes objects based on the Deep Learning algorithm, considering events meeting certain criteria as real threats.
H.265 (+) compression
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
Compression efficiency comparison of H.264, H.265 and H.265+
iVMS-4200 client software
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
Login page of the iVMS-4200 (v3) client software
Access via P2P cloud - Hik-Connect application
A mobile application Hik-Connect is dedicated to operate Hikvision devices using cell phones with the operating system Android or iOS. It can be used to remotely view live video from DVR, NVR, network cameras, video intercoms using Wi-Fi, 2G or 3G networks as well as to view recorded video. Video intercoms can be operated with the application which additionally allows for remote opening of electric doors, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the resident. The application supports connectivity via IP and the P2P cloud. Hik-Connect is also the name of a cloud-based service that allows access to devices in the absence of an external IP address.

Continuity of recordings guaranteed thanks to the ANR function
The image from the IP camera is sent to the recorder as a data stream. Thanks to the support of the ANR (Automatic Network Replenishment) function, the Hikvision IP camera equipped with a microSD card can save recordings on it in the event of network failure, i.e. problems with communication between the camera and the recorder. After the problem is solved, the recordings are automatically synchronized with the recorder and marked with a different color on the playback bar. Such a solution guarantees the continuity of recordings and boosts the entire system performance.
Extensive applications for the organization and use of CCTV systems
Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.

The main window of the SADP software
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.

Specificații

Model
Tip produs NVR
tip Standard
Marcă Hikvision
Serie Seria NXI-I AcuSense
Parametri
Nr. canale 8
Bandă operare Intrare MBps 80
Ieșire MBps 256
Moduri de ieșire HDMI/VGA Independent
Rezoluție maximă de ieșire HDMI 1 px 4K (3840 × 2160)
VGA px 1920 × 1080
BNC px 704 × 576
Codare/decodare standarde de compresie H.265+, H.265, H.264+, H.264
rezoluție maximă de înregistrare MP
două fluxuri de înregistrare Da
redare sincronă 8 canale
rezolutie maximă de decodare
HDD Nr. interfețe SATA 2
Numărul de interfețe eSATA 1
Capacitate maximă pe fiecare HDD TB 14
USB 1
1
Audio bidirecțional Da
Audio Intrare 1, RCA (2.0 Vp-p, 1 kOhm)
Ieșire 1, RCA (linear, 1 kOhm)
Intrări/ieșiri de alarmă Da
Alarmă Intrare 4
Ieșire 1
Ethernet 2 × RJ-45 10/100/1000
Comutator PoE încorporat Nu
Aplicații iVMS-4200, Hik-Connect, Hik-Central
Arhivare USB, Telecomandă
Protocoale de rețea ISUP, DDNS, DHCP, DNS, HTTP, HTTPS, IPv4, IPv6, iSCSI, ISUPI, NFS, NTP, RTSP, SADP, SMTP, SNMP, TCP/IP, UPnP
Funcții inteligente
AcuSense filtru alarme false pe 4 canale pentru camere fără AcuSense (max. 2 MP, compresie H.265, H.264)
Detectarea mișcării 2.0 filtru alarme false
Recunoaștere facială fototeca de fețe 16 biblioteci
fototeca de fețe
Analiza si detectarea feței Comparație foto a feței, Fact capturing, Căutarea imaginilor feței
Comparație foto a feței
analiza feței și eficacitatea detectării
NOTĂ! Detectarea feței și clasificarea persoanelor/vehiculelor nu pot fi activate în același timp. Activarea unei funcții va face ca cealaltă să nu fie disponibilă
Suport pentru detectarea mișcării și funcții VCA Da
Suport pentru camere cu funcții analitice Detectarea mișcării 2.0, VCA, Oamenii numărând, ANPR
Funcții suplimentare ANR, POS
Alții
Alimentare electrică DC V 12
Curent consumat (fără HDD și PoE) W max. 30
Temp. funcționare °C -10...55
Umiditate 10 la 90
Montare pe rack Da
Înălţime U 1
Dimensiuni (L × A × Î) mm
Greutate kg