Coşul este gol

Hikvision 2-Wire

Stații poartă

Modul principal de interfon video a 2-a gen. Hikvision DS-KD8003Y-IME2 (sistem cu 2 fire)
Cod: G73646
Preţ fără TVAPreţ cu TVARabatValiditate  
1114,70 Lei1326,49 Lei0 %
Garanție 2 ani
IP Intercom Station: Hikvision DS-KV8213-WME1(B)/Flush Villa 2 gen (2-subscriber, RFID, WiFi, flush mounted)
View of the main module DS-KD8003Y-IME2
IP Intercom Station: Hikvision DS-KV8213-WME1(B)/Flush Villa 2 gen (2-subscriber, RFID, WiFi, flush mounted)
Back view
IP Intercom Station: Hikvision DS-KV8213-WME1(B)/Flush Villa 2 gen (2-subscriber, RFID, WiFi, flush mounted)
Master card working in the Mifare 13.56 MHz standard
DS-KD8003Y-IME2 is Hikvision's second-generation video door station master module, dedicated to Hikvision 2-Wire operation, allowing power and two-way communication using 2 wires of the cable. It is equipped with a 2 MP (1920 x 1080) fisheye camera with a wide viewing angle of 146° (horizontal plane). The module has a built-in speaker and microphone to allow calls, and a caller with 1 call button. Built-in 2 relays allow you to control the gate or entrance gate (the second relay is disabled by default and is not visible in the system, you need to activate it using iVMS-4200 (v3)). The infrared illuminator allows proper observation in case of low light conditions. Remote viewing and opening is possible via the Hik-Connect mobile app (via a monitor that is required). DS-KD8003Y-IME2 is the basic component of the door station allowing further expansion up to 8 modules and powering them through the RS485 port. The main module is powered with 24 VDC via the 2-Wire trunk using the G74824 DS-KAD706Y distributor.
Key features:
  • fisheye color camera: 2 MP (146° (H)/82° (V)),
  • built,-in speaker and microphone,
  • built-in IR illuminator,
  • 2 relay outputs for control (30 V, 2 A),
  • built-in nameplate holder with 1 button and LED backlight,
  • 4 alarm inputs,
  • image functions: BLC, DNR, WRD,
  • compatible with DS-KD-XXX series frames,
  • maximum expansion up to 8 modules,
  • support for up to 500 indoor stations,
  • remote operation via Hik-Connect app (video door monitor required),
  • output to electric door strike power supply: 12 VDC/0.5 A,
  • configuration via iVMS-4200 (v3),
  • communication bus: 2-Wire,
  • power and communication using G74824 DS-KAD706Y – 24 VDC,
  • functionality of 2nd generation IP video door entry system.
NOTE! The current version of the software is available here.
The device is compatible with the 2-Wire system
which has in its designation name the letter "Y"
2-Wire system
There is often a need to replace the existing intercom (video) system with a newer one, offering greater functionality and quality. Such an upgrade may require replacement of the cabling, e.g. with twisted pair cables for IP systems. Hikvision video intercom is of help here, working in the 2-wire standard, the so-called 2-Wire, which offers the capabilities of an IP system. Building a compact system involves connecting monitors and the main module of the door station to the G74824 DS-KAD706Y distributor via a 2-wire (2-Wire) bus. The 2-Wire bus allows for both, powering the devices and establishing communication. The distributor also allows further expansion and connection to the LAN.
Diagram of the Hikvision 2-wire video intercom
Second generation 2-wire Hikvision IP video intercom systems are distinguished by attractive stylish design and high functionality. Modular design of the door station allows for selection of components depending on the installation requirements. It always includes a main unit for powering of other necessary modules and optional expansion modules (max. 8). Both, the main unit of IP video intercom G73652 DS-KD8003-IME1/EU and the main module G73644 DS-KD8003-IME2 of 2-wire system allow for further extension with the use of respective expansion modules.
  • DS-KD8003Y-IME2 G73646 – 2-Wire system main module,
  • DS-KD-E G73660 – EM 125 kHz card reader module,
  • DS-KD-M G73662 – Mifare 13.56 MHz card reader module,
  • DS-KD-IN G73664 – indicator module,
  • DS-KD-KK G73666 – 6-button name tag module,
  • DS-KD-KP G73668 – numerical keypad module,
  • DS-KD-DIS G73670 – display module,
  • DS-KD-TDM G73671 – display module with touch screen and Mifare reader,
  • DS-KD-BK G73672 – empty module.
The door/gate station can be expanded with the use of flush or surface frames for embedding 1, 2 or 3 module(s) – (DS-KD-XXX), which allows for easy extension of the system depending on the requirements.
System configuration and management
The of the IP video door system can be configured using the iVMS 4200 (v3) client software. The iVMS 4200 client software enables users of HIKVISION devices, such as IP DVRs/NVRs, TurboHD DVRs, video door systems to manage them in IP networks. The software allows for remote configuration and management of the devices. In the case of operating video intercom systems, it is possible to open doors remotely, record the video from the camera, take snapshots, make voice calls to the subscriber monitor(s). The application can also send text notifications with snapshots to the subscriber(s). Any information can be transferred easily and quickly, for example the user of the door station can directly call the monitoring center (iVMS-4200) and establish connection with the security staff.
Login page of the iVMS-4200 (v3) client software
Access via mobile devices
Hikvision devices can be operated via mobile phones with Android or iOS using the dedicated Hik-Connect app. It can be used for remote live viewing from DVR, NVR, network cameras, video door entry systems using Wi-Fi, 2G or 3G networks and also to view stored recordings. Operating video intercoms with the application provides also remote opening of the electric strike, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the subscriber. The application supports connectivity over IP and a P2P cloud. Hik-Connect is also the name of the cloud service that provides access to devices in the absence of an external IP address.
Product typeVideo intercom door/gate station
System2-wire modular
Product generationII
InstallationSurface-mounted, flush-mounted
Housing materialMetal, plastic
Number of subscribers1
Color camera resolutionMP2
Max. stream resolutionmainpx1920 x 1080
secondarypx704 x 576
Viewing angleshorizontal°146
Video compressionH.264
Motion detectionYes
Range of IR illuminatorm3
Other image parametersBLC, DNR, WDR
Flicker reductionMHz50, 60
Max. number of tags when reader is connectedpcs.10000
Built-in speaker/microphoneYes
Two-way audioYes
Audio compressionG.711U, G.711A
Audio bitratekbps64
Audio qualityEcho and noise cancellation
Relay outputs2 (NO/NC)
Alarm inputs4
Tamper contact1
Network interface2-Wire
Other interfacesDebug port, RS-485
ProtocolsTCP/IP, RTSP
Power outputDCV12
Power supplyDCV24 (2-Wire)
Max. power consumptionW4
Protection degreeIP65
Operating temperature°C-40...60
Dimensionsmm100 x 98 x 42
Preţ fără TVAPreţ cu TVARabatValiditate  
1114,70 Lei1326,49 Lei0 %
Modul principal de interfon video a 2-a gen. Hikvision DS-KD8003Y-IME2 (sistem cu 2 fire)
Cod: G73646
George Popescu
Consiliere clienţi
Nou în bibliotecă
Regulamentul | Garanție | Reclamaţii | Download
| Cookies | Politica de confidentialitate Toate drepturile rezervate © 1996-2023 DIPOL sp.j.