Echipamentele ULTIMODE pentru testare și măsurare a fibrelor optice

Recently, we have observed a significant increase in interest of possibility of performing measurements (and creating measurement documentation) for the installations implemented by our clients. To meet these expectations, we are introducing a range of devices which, in our opinion, will be a perfect complement to the fiber optic equipment of LAN, CCTV, automation installers, etc. Depending on your needs, you can choose between simple visual fault locators, a power meter, and a more advanced fiber optic link tester. based on reflectometric measurement. The offer of active devices has been supplemented with launch fibers in elegant and, above all, practical to use housings.

		The ULTIMODE OR-30-S3S5S62B-iSMV L5835 reflectometer/tester generates pulses at three wavelengths - 1310 nm, 1550 nm and 1625 nm. This allows full diagnostics of the optical path for attenuation of the fibre, splices, connectors, as well as events such as fibre bend and cable bend or break. A 1625 nm wavelength is available on a second OTDR connector equipped with filters for lower wavelengths, making it possible to perform measurements on active line in GPON networks and beyond. Dynamic range of 32/30 dB allows verification of connections up to several tens of kilometres in length including splitters. The device helps to verify events and failures such as broken or bent fibre, dirty connectors, bad splices, etc. The function of the light source and power meter allows measurements to be made using the transmission method. Less experienced installers can take advantage of the automatic function, which carries out the measurement automatically selecting the correct parameters and presenting the results in an accessible graphical form. The device has the ability to create advanced measurement reports in pdf/xls. Find out more...

		The ULTIMODE OR-20-S3S5-iSMV L5830 reflectometer has a 3.5-inch multi-touch screen and a friendly interface similar to the typical smartphone user interface. It performs measurements at wavelengths of 1310nm and 1550nm, offering a detailed service of the entire optical path with a length of up to 80 km. It helps in verifying events and problems such as: broken or bent fiber, dirt, bad splices, etc. The light source function and optical power meter allow for a transmission test method. Less experienced installers can use the automatic function, which performs the measurement, automatically downloads the appropriate parameters and provides the results in graphical form. The device has the ability to create advanced PDF/XLS measurement documentation. Find out more...

		The ULTIMODE OPM-20T-V01 L5810 optical power meter is equipped with a universal connector for 2.5 mm ferrules and offers the ability to measure signals in the range: -70...+10 dBm at wavelengths: 850/1300/1310/ 1490/1550/1625nm. The device has a built-in memory of 500 measurements and an auto-calibration function. Additional functions include: a visible light source (visual fault locator VFL) 650 nm, LED flashlight and a network cabling tester (Rj45 connectors). The meter is equipped with a lithium battery charged via a USB Type C connector. Find out more...

		The ULTIMODE VFL-V3-15 L5939 visual fault locator is a 650 nm visible light source with a power of 15 mW enclosed in a small, handy housing. Additionally, the device is equipped with an LED flashlight and a network cabling tester (RJ45 connectors). The built-in lithium battery is charged via the USB Type C connector. Learn more...

		The ULTIMODE VFL-V1-10 L5936 visual fault locator is a 650 nm visible light source with a power of 10 mW in a metal housing. Find out more...

		ULTIMODE FLC launch cords are elements based on the G.652D fiber, necessary for carrying out reflectometric measurements. The length of 150 m is the optimal choice when carrying out measurements based on short and medium pulses. A unique feature of ULTIMODE launch cords is an elegant, practical and easy-to-use plastic housing that allows for proper protection of connections during storage and transport. The offer includes launch cords in the following versions: SC/APC-SC/APC L58510, SC/APC-SC/UPC L58512, SC/APC-LC/UPC L58514. Find out more...