DVR Hikvision DS-7208HTHI-K2 8 canale (8MP@12fps, H.265, HDMI, VGA) HD-TVI TURBO

Suport tehnic

Detalii

HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7204HTHI-K1 (4-ch, 8MP@12fps, H.265, HDMI, VGA)
Front view

HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7204HTHI-K1 (4-ch, 8MP@12fps, H.265, HDMI, VGA)
Rear view

HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7204HTHI-K1 (4-ch, 8MP@12fps, H.265, HDMI, VGA)
Included accessories
Key features of the HD-TVI DS-7204HTHI-K1 DVR:
  • 8 MP recording resolution at 12 fps, 5 MP at 20 fps, 4 MP and lower resolutions at 25 fps,
  • Support for 8 HD-TVI, AHD, HD-CVI or CVBS cameras + 4 IP cameras (max. 8 MP),
  • Analog channels can be replaced with IP channels up to 8 MP,
  • Channel 0 - all cameras can be monitored with minimum demand for network bandwidth,
  • Parallel HDMI and VGA outputs,
  • Independent CVBS output,
  • HDMI resolution: 4K, VGA: 2K,
  • Alarm event recording search,
  • VCA both for analog and IP cameras,
  • Digital zoom during live monitoring and playback,
  • Synchronous playback from 8 cameras,
  • Status monitoring for LAN, cameras, and hard drives.
Hikvision DS-7208HTHI-K2 is a modern DVR designed for the recording of surveillance video in the HD-TVI, AHD, HD-CVI, CVBS, and IP standards with the max. resolution of 8MP (at 12 fps). The device can also support 5 MP at 20 fps, as well as 4 MP / 2 MP/ 720P / VGA / WD1 / 4CIF / CIF at 25 fps.
Support for a variety of video systems
By default, the DVR supports 8 analog cameras (HD-TVI, AHD or CVBS signals) and 4 IP cameras (up to 8 MP). If an unused analog channel is disabled in the menu, another IP camera can be added. The maximum number of supported IP cameras (with all analog channels disabled) is 10.
Enhanced IP mode
The Enhanced IP mode allows to increase the number of supported IP channels (8 IP cameras and max. 16 when all analog channels are disabled). It disables smart events in analog channels and limits the HDMI-VGA output resolution to 1080p. The mode can be activated only through direct access to the DVR's menu.
H.265 video compression
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Intelligent image analysis
Each channel can be independently set up for motion detection and VQD (video quality detection, which e.g. can send e-mails or notifications to alert the user whenever the image is out of focus, too bright, or discolored).
Two analog channels can be selected to detect virtual line crossing (and its direction) and intrusion within a rectangular area.
Users can also opt for the Enhanced VCA mode, in which virtual line crossing and intrusion detection are available in four channels. If the mode is switched on, the CVBS output will be disabled.

Sophisticated client software
The iVMS 4200 client software enables users to manage Hikvision devices in IP networks. The software enables the configuration and management of NVRs/DVRs, IP and analog cameras in hybrid systems. The iVMS 4200 utility can remotely manage up to 256 devices on up to 4 monitors. One monitor can display images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifications, two-way audio transmission, and multi-level e-maps.
The control panel of the iVMS-4200 application
Hik-Connect is a mobile application intended for smartphones with the Android and iOS operating systems. It can be used for the remote live viewing of footage from DVRs, NVRs, network cameras via Wi-Fi, 2G, or 3G networks, as well as the playback of recorded video files. The application connects to the devices by IP addresses and/or through the P2P cloud service.
The start menu of the Hik-Connect app
with a live view thumbnail
The live view screen
Working in the cloud
Hik-Connect is also the name of a network service intended for Hikvison devices. The service relies on P2P cloud computing for remote viewing via smartphones and tablets, and provides extensive monitoring and basic configuration options: live viewing (multiple channels), PTZ control, digital zoom, acoustic monitoring, playback of archival video, and alarm notifications (intrusion, line crossing, etc.).
Main features of the Hik-Connect service:
  • only basic network configuration is required,
  • no external IP address or port forwarding are needed,
  • p2p connection via the cloud or smartphone client application Android, iOS,
  • image encryption.
The architecture of remote access to CCTV devices via the Hik-Connect cloud service
Advanced applications for organizing and operating CCTV systems
Various applications intended for the installers and operators/users of video surveillance systems based on Hikvision devices are described in this article.

The main window of the SADP application
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software and its use can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.
Specifications:
Model/Name DS-7208HTHI-K2
Code M75808
Video formats
HD-TVI, AHD, HD-CVI, CVBS, IP
Video inputs 8 x BNC
Video outputs
 HDMI, VGA
HDMI1/VGA video output 4K: 3840×2160, 30Hz (HDMI only) 
2K: 2560×1440, 60Hz
1080p: 1920x1080
SXGA: 1280x1024
720p: 1280x720
XGA 1024x768
Audio inputs/outputs RCA 4 /1
Alarm inputs/outputs 4/1
Alarms and exceptions
Motion detection, video loss, camera tampering
Live streaming
25 fps
Recording options (resolution
/frame rate)
8 MP 12 fps
5 MP 20 fps
4 MP
 25 fps
1080p 25 fps
WD1/4CIF 25 fps
Video bit rate (single channel) 32 Kbps - 10 Mbps
Audio bit rate
64 Kbps
HDD capacity & interface 2 x 10 TB HDD SATA
S.M.A.R.T. monitoring tools
Yes
NAS/SAN compatibility Yes, NAS
External ports
1xUSB 2.0, 1 x USB 3.0. RS-485, RJ-45
Secondary stream
CIF/QCIF
Network protocols
TCP/IP, DHCP, DDNS, PPPoE, E-mail, NTP, SNMP, UPnP
Software ports
Server - 8000
HTTP - 80
RTSP - 554
Remote monitoring
Internet Explorer, PC applications, smartphones
PTZ protocols
Yes
Archiving USB storage device, remote server
Power 12 VDC
Power consumption
<20 W
Operating temperature
-10...55 ºC
Operating humidity
10...90%
Dimensions (W x D x H) 380 x 320 x 48 mm

Specificații

Model DS-7208HTHI-K2
Tip produs DVR HD Analog
Producător Hikvision
Serie TurboHD 4.0
Parametri
Intrări video analogice număr 8
Intrări video analogice Rezolutie maximă MP 8
Standarde suportate multisistem (HD-TVI, HD-CVI, AHD, CVBS)
semnal implicit HD-TVI
schimbabil cu IP Da 1:1
Intrări video IP număr în modul standard 8
Intrări video IP cantitate după oprirea canalelor analogice 16
Înregistrare Compresie video H.265+/H.265/H.264+/H.264/MPEG4
Înregistrare viteza pentru semnal implicit 15 pentru 8 MP, 20 pentru 5 MP, 25 pentru 4 MP și mai jos
rata de biți a unui singur canal video 32 kb/s – 16 MBps
Compresie audio G.711U
rata de biți a canalului audio 64 Kbps
Rezoluția maximă a ieșirilor video HDMI 1 px 3840 × 2160 (4K)
Rezoluția maximă a ieșirilor video VGA 1 px 1920 × 1080
BNC 704 × 576 (CVBS)
Moduri de ieșire video Parallel HDMI1/VGA1
Decodare redare sincronă 8
HDD numărul de interfețe SATA II 2
HDD Capacitate maximă pe fiecare HDD TB 10
Analiza imaginii (algoritm convențional)
Incidente de bază Detectarea miscării, Tamper imagine, Intrare alarmă, Excepție, Ieșire alarmă
Incidente avansate Detecție trecere linie, Detectarea intrării în zonă, Detectarea iesirii din zonă
Interfețe
USB 1
USB 1
Audio bidirecțional Da
Audio Intrare 4, RCA (2.0 Vp-p, 1 kOhm)
Audio Ieșire 1, RCA (linear, 1 kOhm)
Alarmă Intrare 8
Alarmă Ieșire 4
Interfețe seriale RS-485
Ethernet 1 × RJ-45 10/100/1000
Alții
Aplicații Hik-Connect, iVMS-4200
Arhivare USB, Telecomandă
Protocoale de rețea TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, ONVIF
Ieșire sursă alimentare DC V 12
DC A 3,1
Consum de energie (fără HDD) DC W 20
Temp. funcționare °C -10 ...+ 55
Umiditate 90 sau mai puțin (fără condensare)
Dimensiuni (L × A × Î) mm 380 × 320 × 48
Înălţime U 1
Greutate kg 2