COŞUL MEU
Coşul este gol

DVR-uri

FullHD

DVR auto Protect 116 (4x1080p, 25 fps, 1 HDD/SSD slot, GPS, RJ-45)
Cod: M80116
Preţ fără TVAPreţ cu TVARabatValiditate  
1911,89 Lei2275,15 Lei0 %
Garanție 2 ani
Mobile DVR Protect 114 (4-ch, 2x SD slot)
Front view
View of a single drive bay
Mobile DVR Protect 114 (4-ch, 2x SD slot)
Back view
Mobile DVR Protect 114 (4-ch, 2x SD slot)
View of the included remote control
Mobile DVR Protect 114 (4-ch, 2x SD slot)
The accessories included
Mobile DVR Protect 114 (4-ch, 2x SD slot)
The accessories included
Key features:
  • Maximum recording resolution of 1080p at 25 fps,
  • Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and two IP cameras (up to 1080p, 1 RJ-45 connector with PoE passive),
  • Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot),
  • Possibility to copy recordings to a flash drive (1 USB 2.0 slot in the front),
  • Automatic HDD slot heating to start recording at temperatures from -40oC,
  • Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G,
  • Wide operating temperature range from -40oC to 80oC,
  • Built-in G- overload sensor,
  • GPS module with an external antenna,
  • Power supply for 4 x AHD cameras and 1 PoE camera (12V),
  • Power supply backup – the DVR continues to record after a short power failure (up to 8 s),
  • Automatic recording after power supply is connected.
The Protect 116 M80116 is a 4-channel mobile DVR designed for use in coaches, city buses, minibuses, street cars/trams, subway, corporate vehicles, tractor-trailer trucks/TIR trucks, patrol cars, prisoner vans, ambulances or military vehicles. It has been specifically designed to provide increased resistance to vibration and shock.
The DVR is designed to be mounted inside the cab of a vehicle, e.g. under the seat, in a glove compartment etc. The power cables have to be connected to the battery and ignition switch (similar to radio), so that the device automatically begins video and audio recording simultaneously with turning on the ignition. The power circuit is protected by 5 A fuse which protects against excessive current drawing and burning of the wiring in the event of a fault. By default, the recorder runs until the power supply is turned off with the ignition key, unless the delayed turn off function (running for a specified time after switching off) or a schedule function is active. The DVR has also its own power backup and runs for about 8 seconds more to safely save all data.
Diagram of the plug for connecting cameras
Protect 116 has 4 video inputs equipped with M12 connectors – the kit includes adapters with BNC sockets (video), 2.1/5.5 plugs (power) and RCA sockets (audio). Connection of cameras to M12 connector allows quick and secure connection of video signal and power supply to the cameras directly from the DVR itself. The DVR allows to record images from 4 channels simultaneously at 25 fps at resolutions of 1080p or lower. The video quality is sufficient to easily recognize the traffic situation, the behavior of people, and even faces, or license plate numbers. AHD and CVBS signals are supported. The signal type has to be set in the DVR (default setting is AHD 1080p).
The DVR has 3 video outputs: VGA (1280 X 1024), Cinch (CVBS signal) on 3.5 mm jack connector on the front and M12 socket on I/O connector on the back (CVBS signal).
A GPS antenna is included. When connected, the GPS module turns on automatically and details of the speed and device position are included in the video. At the same time, data from acceleration sensors,which read the data in three axes (X, Y and Z), is always saved.
Video and sound archiving from the connected cameras is done on 1 HDD/SD with capacity up to 1 TB. The recordings can be exported to flash drives and played back with the included software. The recordings are stored along with the GPS, acceleration and alarm input data in their respective device formats. In addition to searching and playing recordings from cameras, the software enables the use of the additional DVR capabilities including generating a graph of the alarm input activation on a timeline or vehicle position based on the saved GPS coordinates.
The alarm inputs can monitor the vehicle devices plugged into the electrical system. These may include shifting into the reverse, opening the fuel filler door, door closing, seat belt fastening, cargo area opening, brake pressing, indicting etc. Activation of an input can be linked to an alarm action, e.g. the shifting into reverse can display lines on the camera image showing the distance, or switching the image preview to a specific camera.
The DVR can be controlled with the included IR remote control. The graphical menu is displayed by video output that can be connected to a monitor.
Specifications:
Model116
Product codeM80116
Product typeMobile DVR
BrandProtect
Video inputsnumber4
connector typeM12, 4-pin - A connectors on the cable, BNC adapter included
power supply to each channel12 V, 3 A
passive PoE 12V (pin 4/5 +, pin 7/8 -.)
Audio and video signalstandards supportedPAL, NTSC
signals supportedAHD, CVBS, IP (automatic detection of signal type and resolution)
multiple streams supportedYes, 2 streams per every channel
PAL recording2 MPfps25
720pfps25
D1/CIFfps25
video compression H.264
max. video bitrate per channelMbps4
Video outputstypeVGA socket, M12 socket
VGA resolutionp1280 X 1024
M12, RCA resolutionp704 x 576
image display layoutvarious division modes: single camera, division into 2, 3, 4 or 6 cameras 
 horizontal reflectionyes
mirror reflectionyes
Archivingcarriers1 x HDD / SSD 2.5"
maximum storage capacity GB2 TB
data volume for typical recording parameters (H.256, 1080p, 15fps) for 1 camera0.9 GB/h
playbackDVR, PC application
carrier protectionlock
SystemOSLinux
languagePolish, English
controlremote control (included)
user accounts3 (admin - default password 888888 and 2 users)
Alarm interfacesinputs8
outputs1
USB portsnumber1, USB 2.0
control data backup, update
GPSYes
G-SensorYes
Operating temperature°C-40...+80
Humidity%20...95
Power supplyvoltageVDC8...36
power consumptionWRunning <36
Standby<0.5
Dimensions (WxDxH)mm192 x 184 x 61 (with additional cable housing 248 x 184 x 61)
Weight incl. packagingkg2.6
Preţ fără TVAPreţ cu TVARabatValiditate  
1911,89 Lei2275,15 Lei0 %
 
DVR auto Protect 116 (4x1080p, 25 fps, 1 HDD/SSD slot, GPS, RJ-45)
Cod: M80116
George Popescu
Consiliere clienţi
COMPLETAŢI
BIBLIOTECA
Nou în bibliotecă
RECOMANDĂRI
 
Regulamentul | Garanție | Reclamaţii | Download
| Cookies | Politica de confidentialitate Toate drepturile rezervate © 1996-2023 DIPOL sp.j.