DVR auto Protect 116 (4x1080p, 25 fps, 1 HDD/SSD slot, GPS, RJ-45)

Suport tehnic

Detalii

Mobile DVR Protect 114 (4-ch, 2x SD slot)
Front view
View of a single drive bay
Mobile DVR Protect 114 (4-ch, 2x SD slot)
Back view
Mobile DVR Protect 114 (4-ch, 2x SD slot)
View of the included remote control
Mobile DVR Protect 114 (4-ch, 2x SD slot)
The accessories included
Mobile DVR Protect 114 (4-ch, 2x SD slot)
The accessories included
Key features:
  • Maximum recording resolution of 1080p at 25 fps,
  • Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and two IP cameras (up to 1080p, 1 RJ-45 connector with PoE passive),
  • Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot),
  • Possibility to copy recordings to a flash drive (1 USB 2.0 slot in the front),
  • Automatic HDD slot heating to start recording at temperatures from -40oC,
  • Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G,
  • Wide operating temperature range from -40oC to 80oC,
  • Built-in G- overload sensor,
  • GPS module with an external antenna,
  • Power supply for 4 x AHD cameras and 1 PoE camera (12V),
  • Power supply backup – the DVR continues to record after a short power failure (up to 8 s),
  • Automatic recording after power supply is connected.
The Protect 116 M80116 is a 4-channel mobile DVR designed for use in coaches, city buses, minibuses, street cars/trams, subway, corporate vehicles, tractor-trailer trucks/TIR trucks, patrol cars, prisoner vans, ambulances or military vehicles. It has been specifically designed to provide increased resistance to vibration and shock.
The DVR is designed to be mounted inside the cab of a vehicle, e.g. under the seat, in a glove compartment etc. The power cables have to be connected to the battery and ignition switch (similar to radio), so that the device automatically begins video and audio recording simultaneously with turning on the ignition. The power circuit is protected by 5 A fuse which protects against excessive current drawing and burning of the wiring in the event of a fault. By default, the recorder runs until the power supply is turned off with the ignition key, unless the delayed turn off function (running for a specified time after switching off) or a schedule function is active. The DVR has also its own power backup and runs for about 8 seconds more to safely save all data.
1) +12 V4) Video3) Audio2) GND
Diagram of the plug for connecting cameras
Protect 116 has 4 video inputs equipped with M12 connectors – the kit includes adapters with BNC sockets (video), 2.1/5.5 plugs (power) and RCA sockets (audio). Connection of cameras to M12 connector allows quick and secure connection of video signal and power supply to the cameras directly from the DVR itself. The DVR allows to record images from 4 channels simultaneously at 25 fps at resolutions of 1080p or lower. The video quality is sufficient to easily recognize the traffic situation, the behavior of people, and even faces, or license plate numbers. AHD and CVBS signals are supported. The signal type has to be set in the DVR (default setting is AHD 1080p).
The DVR has 3 video outputs: VGA (1280 X 1024), Cinch (CVBS signal) on 3.5 mm jack connector on the front and M12 socket on I/O connector on the back (CVBS signal).
A GPS antenna is included. When connected, the GPS module turns on automatically and details of the speed and device position are included in the video. At the same time, data from acceleration sensors,which read the data in three axes (X, Y and Z), is always saved.
Video and sound archiving from the connected cameras is done on 1 HDD/SD with capacity up to 1 TB. The recordings can be exported to flash drives and played back with the included software. The recordings are stored along with the GPS, acceleration and alarm input data in their respective device formats. In addition to searching and playing recordings from cameras, the software enables the use of the additional DVR capabilities including generating a graph of the alarm input activation on a timeline or vehicle position based on the saved GPS coordinates.
The alarm inputs can monitor the vehicle devices plugged into the electrical system. These may include shifting into the reverse, opening the fuel filler door, door closing, seat belt fastening, cargo area opening, brake pressing, indicting etc. Activation of an input can be linked to an alarm action, e.g. the shifting into reverse can display lines on the camera image showing the distance, or switching the image preview to a specific camera.
The DVR can be controlled with the included IR remote control. The graphical menu is displayed by video output that can be connected to a monitor.
Specifications:
Model 116
Product code M80116
Product type Mobile DVR
Brand Protect
Video inputs number 4
connector type M12, 4-pin - A connectors on the cable, BNC adapter included
power supply to each channel 12 V, 3 A
passive PoE 12V (pin 4/5 +, pin 7/8 -.)
Audio and video signal standards supported PAL, NTSC
signals supported AHD, CVBS, IP (automatic detection of signal type and resolution)
multiple streams supported Yes, 2 streams per every channel
PAL recording 2 MP fps 25
720p fps 25
D1/CIF fps 25
video compression  H.264
max. video bitrate per channel Mbps 4
Video outputs type VGA socket, M12 socket
VGA resolution p 1280 X 1024
M12, RCA resolution p 704 x 576
image display layout various division modes: single camera, division into 2, 3, 4 or 6 cameras 
  horizontal reflection yes
mirror reflection yes
Archiving carriers 1 x HDD / SSD 2.5"
maximum storage capacity GB 2 TB
data volume for typical recording parameters (H.256, 1080p, 15fps) for 1 camera 0.9 GB/h
playback DVR, PC application
carrier protection lock
System OS Linux
language Polish, English
control remote control (included)
user accounts 3 (admin - default password 888888 and 2 users)
Alarm interfaces inputs 8
outputs 1
USB ports number 1, USB 2.0
control  data backup, update
GPS Yes
G-Sensor Yes
Operating temperature °C -40...+80
Humidity % 20...95
Power supply voltage VDC 8...36
power consumption W Running <36
Standby<0.5
Dimensions (WxDxH) mm 192 x 184 x 61 (with additional cable housing 248 x 184 x 61)
Weight incl. packaging kg 2.6

Specificații

Model Protejează 116
Producător Proteja
Intrări video număr 4
rezoluție 1080p
Intrări video tip conector M12, 4 pini – conectori A pe cablu, adaptor BNC inclus
alimentare cu energie pentru fiecare canal 12 V, 3 A PoE pasiv 12 V (pin 4/5 +, pin 7/8 -.)
Semnal audio si video standardele suportate PAL, NTSC
Semnale suportate AHD, CVBS, IP (detecția automată a tipului și rezoluției semnalului)
mai multe fluxuri acceptate Da, 2 fluxuri pe fiecare canal
Înregistrare PAL 2 MP fps 25
720p fps 25
D1/CIF fps 25
Compresie video H.264
max. rata de biți video pe canal Mbps 4
Ieșiri video tip Mufa VGA, mufa M12
Rezoluție VGA p 1280 x 1024
M12, rezoluție RCA
aspectul de afișare a imaginii Diferite moduri de împărțire: o singură cameră, împărțire în 2, 3, 4 sau 6 camere
Suport pentru funcția de imagine reflexie orizontală Da
reflexie în oglindă Da
Arhivare transportatorii 1 × HDD/SSD 2.5"
capacitate maximă media 2TB
rata de date pentru parametrii tipici de înregistrare (H.256, 1080p, 15 fps) 0.4 GB/h
redare DVR, aplicație PC
protecția purtătorului Încuietoare
Sistem OS Linux
limbă Engleză
Control Telecomandă (inclusă)
conturi de utilizator 3 (admin – parola implicită 888888 și 2 utilizatori)
Interfețe de alarmă intrari 8
ieșiri 1
porturi USB număr 1, USB 2.0
Control Backup de date, actualizare
GPS Da
Temp. funcționare °C -40...+80
Umiditate 20...95
Alimentare electrică Tensiune VDC 8...36
Consumul de energie W Rulare <36 Standby <0,5
Dimensiuni (lxlxh) mm 192 × 184 × 61 (cu carcasă de cablu suplimentară 248 × 184 × 61)
Greutate kg