DVR auto 4 canale Protect 316 1080p, H.265, 25 fps, 2×card SD, GPS,4G, RJ-45

Cod: M80316
1924,38 Lei
Preţ cu TVA Rabat Cant. Validitate
1924,38 Lei 0 % de la 1 buc.
Disponibil
DVR auto cu 4 canale ce înregistrează pe carduri SD cu o calitate de max. 1080p. Intrările de alarmă permit integrarea cu diverse senzori. Compresie video H.265, modul 4G LTE.
• Înregistrarea video și audio a 4 camere 1080p AHD (1080p sau mai mic) sau CVBS (960H sau mai mic) la 25 fps
• Înregistrare - 2 sloturi pentru carduri SD cu o capacitate de până la 512 GB fiecare
• Modul de comunicații încorporat 4G LTE - Slot pentru card SIM și antenă
• Modul GPS încorporat cu antenă externă
• G-sensor încorporat cu 3 axe
• Giroscop încorporat cu 3 axe
• Temperatură de funcționare extinsă: -40°C...80°C
• Backup de alimentare - recorderul continuă să înregistreze după o scurtă pierdere de alimentare (până la 8 sec)
• Începerea automată a înregistrării după conectarea sursei de alimentare (pornirea mașinii)

Garanție

Garanție 2 ani.

Suport tehnic

Detalii

Protect 316 M80316 is a four-channel mobile recorder designed for use in coaches, public transport, company and passenger vehicles, and special vehicles, such as trucks, police cars, prison or military vehicles, and ambulances. Its design provides increased resistance to vibrations and shocks.
The recorder is designed for installation inside the vehicle cabin, for example under the seat, in the compartment or in the trunk. The power cables are connected to the battery and ignition (similarly to the radio), which allows the device to automatically start audio-video recording after turning the key in the ignition. The power supply system is protected by a 5 A fuse, which protects against excessive current consumption and burnout of the electrical system in the event of a failure. By default, the recorder works until the power is disconnected by the ignition key, unless the delayed shutdown function is activated (operation for a specified time after switching off) or work according to a schedule. Additionally, the recorder has its own power backup, which allows it to work for about 8 seconds after the power is disconnected to safely save all data.
Diagram of the plug for connecting cameras
Protect 316 has 4 video inputs equipped with M12 connectors. The set includes adapters with a BNC socket (video), a 2.1/5.5 plug (power) and an RCA socket (audio). Connecting the cameras to the M12 connector allows for quick and safe connection of the video signal and powering the cameras directly from the recorder. Simply connect the recorder to the vehicle's power supply to ensure the operation of the recorder and cameras. The recorder allows for recording images from 4 channels simultaneously at 25 fps for 1080p resolution or lower. The video quality allows for trouble-free recognition of the road situation, people's behavior, and even faces and license plate numbers. AHD and CVBS signals are supported
Key features:
  • recording image and sound from 4 cameras 1080p AHD (1080p or lower) or CVBS (960H or lower) at 25 fps, 12 V power supply and 1 IP camera (up to 1080p, 1 RJ-45 connector)
  • recording - 2 slots for SD cards with a capacity of up to 512 GB each
  • built-in 4G LTE communication module - SIM card slot and antenna
  • built-in GPS module with external antenna
  • built-in 3-axis G-sensor
  • built-in 3-axis gyroscope
  • wide operating temperature range -40oC to 80oC
  • power backup - the recorder continues to record image after a short power failure (up to 8 s)
  • automatic recording after connecting the power supply (turning the ignition)
4G LTE connectivity
The device is equipped with a communication module supporting 4G LTE and lower standards (3G and 2G), along with an antenna that must be installed in the vehicle (your own SIM card is required). Thanks to this, user get continuous, remote access to live image preview, recordings, location, route traveled, speed or vehicle parameters from connected sensors. If necessary, the device can create copies of recordings. A server with the IVMS software installed is required for this.
GPS module, overload sensor and gyroscope
The device comes with a GPS antenna. Once connected, the GPS module turns on automatically and the video data includes information about the speed and position of the device. At the same time, data from the acceleration and position sensors (gyroscope) reading data in three axes (X, Y and Z) are always recorded. The device can detect collisions, hard braking, acceleration or taking corners too fast.
H.265 compression
The recorder supports H.265 encoding, which, compared to its predecessor (H.264), allows to reduce the data stream and the demand for disk capacity by half. This allows to use data carriers with half the capacity or store recordings twice as long.
Data archiving
The device has 2 slots for SD cards with a capacity of up to 512 GB each. Access to the media is secured with a lockable latch, which ensures that only an authorized person has access to the cards. The overwrite option allows for maintenance-free operation of the device - when the cards are full, the newest recordings replace the oldest ones, which eliminates the need to delete recordings or format cards after they are full. Recordings are collected together with GPS data, acceleration and alarm inputs in the device's own format. To play back recordings, the IVMSPlayer software is required. In addition to searching and playing back recordings from cameras, the software has functions that allow to use the additional capabilities of the recorder - it offers, among others, the ability to generate a graph of alarm input activation on the time axis or the vehicle's position based on saved GPS coordinates.
Integration with vehicle sensors
Alarm inputs can monitor car devices connected to the electrical system. These can be: engaging reverse gear, opening the fuel filler cap, closing doors, fastening seat belts, opening the cargo area, pressing the brake, turning on the indicators, etc. Activation of the input can be linked to an alarm action, e.g. engaging reverse gear can overlay lines showing the distance on the camera image or switching the image preview to a specific camera.
Control of DVR
The DVR can be controlled with the included IR remote control. The graphical menu is displayed by video output that can be connected to a monitor.
Connecting to monitor
The recorder has 2 video outputs: Cinch (CVBS signal) on the 3.5 mm Jack connector on the front and M12 socket on the I/O connector on the rear (CVBS signal)

Specificații

Model Protect 316
Producător Proteja
Intrări video număr 4
rezoluție 1080p
Intrări video Tip conector Mufe M12, 4 pini – A, pe cablu
alimentare cu energie pentru fiecare canal 12V
Semnal audio si video standardele suportate PAL, NTSC
Standarde suportate AHD, CVBS, IP (detecția automată a tipului și rezoluției semnalului)
mai multe fluxuri acceptate Da, 2 fluxuri pe fiecare canal
Înregistrare PAL 2 MP fps 25
720p fps 25
D1/CIF fps 25
Compresie video H.265, H.264
max. rata de biți video pe canal Mbps 4
Ieșiri video Tip mufa M12, RCA
M12, rezoluție RCA 704 x 576
aspectul de afișare a imaginii Diferite moduri de împărțire: o singură cameră, împărțire în 2, 3, 4 sau 6 camere
Suport pentru funcția de imagine oglindire orizontală Da
funcție mirror Da
Arhivare Medii de stocare 2 sloturi SD/SDHC
capacitate maximă media 2 x 512GB
rata de date pentru parametrii tipici de înregistrare (H.256, 1080p, 15 fps) 0.4 GB/h
redare DVR, aplicație PC, Server
protecția purtătorului Încuietoare
Sistem OS Linux
modul WiFi IEEE 802.11 a/b/g/n/ac
limbă Engleză
Control Telecomandă (inclusă)
conturi de utilizator 3 (admin – parola implicită 888888 și 2 utilizatori)
Interfețe de alarmă intrari 8
ieșiri 1
porturi USB număr 1, USB 2.0
Control Backup de date, actualizare
GPS Da
Giroscop Da, 3-axe
Senzor G Da, 3-axe
Temp. funcționare °C -40...+80
Umiditate % 20...95
Alimentare Tensiune VDC 8...36
Consum energie W Rulare <36 Standby <0,5
Dimensiuni (lxlxh) mm 170 x 187 x50 (with additional enclosure), 170 x 142 x 50
Greutate kg 0,9