DIPOL la târgul internațional de securitate SECUREX, 23-26 Aprilie 2018


During this edition, DIPOL will present both CCTV solutions highly valued on the installation market and a number of new products in the broad fields of low-voltage, RF, and fiber optic systems. At the stand, you can see the latest models of analog and IP high-resolution cameras and DVRs/NVRs, dedicated to video surveillance systems ranging from several to hundreds of cameras. We will also present mobile solutions and the long-awaited system allowing for the integration of IP surveillance systems with shared TV antenna systems (S/MATV, CATV). Other supplements will include e.g. the use of optic fiber technology in CCTV and TV distribution systems. Our sales and technical advisors will provide support how to implement various kinds of CCTV, TV/SAT, Wi-Fi installations. Welcome!
Terra mix-440
Transmodulation of RTSP streams from IP cameras to DVB-T signals
Video from IP security cameras distributed in (S)MATV and CATV systems
IP cameras do not generate video signals but data streams. The information cannot be distributed to televisions with the use of typical modulation methods employed in the case of analog cameras. The injection of the video information from IP CCTV cameras into an RF distribution network (a private or shared antenna system, CATV network etc.) requires application of intermediate devices. So far, the most popular solution has been the use of digital HDMI - DVB-T modulators (capable of transmission up to Full HD 1080p / 60 Hz). The HDMI signal carrying the video information from one or a number of IP cameras is available at the monitor output of the IP NVR in the IP CCTV system. In the case of one HDMI signal, it is sufficient to use a single channel HDMI to DVB-T modulator, otherwise one will need a multi-channel HDMI to DVB-T modulator (max. 4 channels). However, when the investor wants to have separate images from the cameras, the number of the channels is limited by the number of independent HDMI outputs in the NVR(s). And what about the situation when the number of the IP cameras that should independently provide the video and sound information is much higher, e.g. 12?
During Securex 2018, DIPOL will present IP (100/1000 Mbps) to 4x DVB-T transmodulator mix-440 R81611. The newest firmware version of the device, 2.04, has been extended with conversion of RTSP streams from IP cameras to DVB-T COFDM standard. This functionality enables the addition of information from IP cameras, encoded in H.264 or H.265 standard, into TV distribution systems, without a need for other devices (NVRs and DVB-T modulators).
3-Way TV/FM Splitter R-3 SignalIP to 4x DVB-T (COFDM) Transmodulator: TERRA mix-440 (100/1000Mbps, USB port)DIN Rail Power Supply DR-60-12 (12VDC/4.5A, for Terra at/mt/ma modules)1-way Tap: FAC-1-12dB (5-1000MHz)1-way Tap: FAC-1-10 dB (5-1000MHz)1-way Tap: FAC-1-8dB (5-1000MHz)
Mix-440 R81611 converts IP stream provided in UDP/RTP protocols (unicast/multicast SPTS and MPTS transmissions) and RTSP stream (from IP cameras) to DVB-T COFDM standard


Mix-440 R81611 can create four DVB-T multiplexes (MUXes), each with a maximum throughput of 31.66 Mbps, which is sufficient for the support of 12 Full HD IP cameras.
Vimtag Wi-Fi cloud
Home video monitoring with recording and live view on phones and remote PCs
There was no such quality at such a price
During the Securex fair we will present new Vimtag IP/Wi-Fi cameras supported by cloud service, dedicated for a variety of home applications. They make an ideal solution for everyone requiring many functions performed by a single device. The functions include an electronic nanny, helper in the care of elderly parents, a pet minder, or just a simple home monitoring system. Thel CP2 K1561 model is equipped both with Wi-Fi and LAN interface. With PTZ function, the user can watch the whole room, remotely changing the direction of the camera within 350° horizontally and 90° vertically. The IR illuminator with range up to 10 m guarantees perfect visibility at night. The card slot accepts microSD cards with capacity up to 128 GB which can store the recordings. The built-in speaker and microphone allow for bi-directional voice communication. With a smartphone, the user can listen to what is happening around the camera, send a voice message or just talk like on a speakerphone. Motion detection can trigger snapshot/video recording and/or real-time push notifications.
Home Security IP Camera: Vimtag CP2 (720p, WiFi, IR, audio, microSD, PTZ)
Home Security IP Camera: Vimtag CM1 (720p, WiFi, IR, audio, microSD)
Vimtag CP2 IP/Wi-Fi/LAN camera
K1561
Vimtag CM1 IP/Wi-Fi camera
K1552
The CM1 K1552 model is a fixed type of camera with slim and elegant look and Wi-Fi interface. The both cameras can be accessed and operated with Andoid and iOS devices, as well from PCs via Vimtag applications. The connections with the cameras are also possible via internet browsers. To access their devices, the users should simply log in to the previously created accounts. In the local network, it is possible by entering the IP address of the device.
Vimtag cameras with WI-Fi connectivity allow users for instant implementation of home video monitoring
with live access via smartphones, tablets, PCs
Fusion splicer Signal Fire AI-8
DIPOL is successively launching solutions for fiber optic systems that can be used both by large installation companies operating in this field and by installers who deal with fiber optic solutions occasionally. The latest product offered is Signal Fire AI-8 fusion splicer L5870 combining affordable pricing and technological solutions reserved for top-notch devices.
Fusion Splicer: Signal Fire AI-8 (with toolbox and tools)
Signal Fire AI-8 L5870 fusion splicer
Signal Fire AI-8 employs core alignment technology (there is option of cladding alignment) that ensures minimum attenuation of the splices. Fiber ends are positioned by 6 stepper motors from Siemens, which is an absolute exception in this price category. The splicer can be used both for deployment of hundred-kilometer-long fiber optic trunks and in FTTH systems requiring short point-to-point connections, in LAN installations and fiber-based video surveillance systems. The AI-8 model is controlled by a quad-core processor providing fast response times (the splicer is ready to work after 3 seconds) and ensuring short splicing and sleeve heating operations. The splicer is one of the fastest devices of its kind currently available on the market and the fastest in its price class.
Fusion Splicer: Signal Fire AI-7 (with toolbox and tools)
Fusion Splicer: Signal Fire AI-7 (with toolbox and tools)
A unique feature of the kit is the toolbox made of high quality plastics,
containing all the necessary tools, power supply and accessories.
At our stand, visitors will have the opportunity to familiarize themselves with technical details concerning the fusion splicer.
Protect mobile DVRs
4-ch 720p mobile DVR

Mobile DVR Protect 115 (4-ch, 2x SD slot, GPS)
Mobile DVR Protect 115 (4-ch, 2x SD slot, GPS)
Mobile Protect DVRs designed for use in coaches, city buses, minibuses, street cars / trams, subway, corporate vehicles, tractor-trailer trucks / TIR tracks, patrol cars, prisoner vans, ambulances, military vehicles. It has been specifically designed to provide increased resistance to vibration and shock. The DVRs are designed to be mounted inside the cab of a vehicle, e.g. under the seat, in a glove compartment etc. The power cables have to be connected to the battery and ignition switch (similar to radio), so that the device automatically begins video and audio recording simultaneously with turning on the ignition.
Main features:
  • Support for two SD cards, each up to 128 GB
  • H.264 video compression
  • Recording of 4 channels
    • WD1 at 25 fps + 1x IP 1080p
    • or 4x AHD 720p at 25 fps
  • Free application for synchronized playback for a PC
  • Automatically generated route based on GPS coordinates recorded on SD card (Protect 115)
HD-TVI 8 MP video resolution
unprecedented quality of analog video surveillance
High definition (HD) systems have become standard solutions in video surveillance. HD-TVI (High Definition Transport Video Interface) and AHD (Analog High Definition) systems can offer high resolution video (up to 8 MP) for costs comparable with the obsolete analog solutions based on CVBS equipment. The key to the success of these systems have been the connection of advantages of analog video technology (ease of installation and configuration, high compatibility of devices of different manufacturers) with high resolutions characteristic for IP systems, along with increased resistance to interference.
The latest version 4.0 of HD-TVI system supports 8 MP image resolution. Thanks to higher resolution of such systems, they can either employ a fewer number of cameras (each camera with wide viewing angle can cover a larger area) or provide more detailed surveillance information. The live video is not compressed (compression is necessary only for recording), so it is more crisp compared with IP cameras, as well as has no latency.
Key features of HD-TVI 4.0 systems:
  • image resolutions up to 8 MP
  • PoC - power over coax - power supply over video cable
  • sensitivity from 0.005 lx
  • compatibility with AHD cameras
  • maximum transmission distance longer than in the case of CVBS (RG-59 cable: 800 m for 1080p video)
  • H.265 and H.265+ codecs ensure lower bit rates minimizing disk space consumption)
  • HDTVI 4.0 DVRs are equipped with a range of video outputs:
    • CVBS - compatibility with legacy CVBS monitors and TV systems
    • HDMI - support for monitors/televisions with resolutions up to 4K
    • VGA - support for VGA monitors with resolutions up to 2K
HD-TVI TURBO HD 4.0 Camera Hikvision DS-2CE16H1T-IT3Z (compact, 5MP, 2.8-12 mm motozoom, 0.01 lx, IR up 40m)
M75771 - compact camera Hikvision DS-2CE16H1T-IT3Z with 5 MP video resolution and motozoom lens
DIPOL offers complete ranges of HD-TVI and AHD products. It means a wide variety of cameras with different parameters, placed in various types of housings, suitable DVRs, and multiple accessories, also for changing the transmission medium. The visitors will have the opportunity to familiarize themselves with the advantages of the new systems and to compare the quality of images from selected cameras.
EasyIP 3.0 and EasyIP Lite
New series of IP cameras from Hikvision
The new series of Easy IP 3.0 cameras provides high quality video for affordable price. Thanks to Dark Fighter (Ultra-low-light) technology, so far available only in special series, the devices are able to render colors and details in low-light environments much more accurately than other cameras at similar price level. The integrated VCA video analytics functions, such as face detection, detection of intrusion, line crossing, new (left) or disappearing objects, allow for implementations of very advanced projects.
Ceiling IP Camera: Hikvision DS-2CD2135FWD-IS (3MP, 2.8mm, 0.005 lx, IR up to 30m, WDR, IK10, Audio IN/OUT, H.265/H.264)
Compact IP Camera: Hikvision  DS-2CD2685FWD-IZS (8MP, 2.8-12mm Motozoom, 0.01 lx, IR up to 50m, WDR, IK10, Audio, H.265/H.264)
Compact IP Camera: Hikvision DS-2CD2T55FWD-I5 (5MP, 2.8mm, 0.01 lx, IR up to 50m, WDR, H.265/H.264)
K17294 Hikvision
DS-2CD2135FWD-IS
K17727 Hikvision
DS-2CD2685FWD-IZS
K17825 Hikvision
DS-2CD2T55FWD-I5
Easy IP 3.0 cameras implement several video compression methods, H.265+, H.265, H.264+, H.264, MJPEG. Compared with H.264, H.265 standard can reduce by half the data stream, which translates into proportional savings of the disk space or extended data retention time. H.265+ and H.264+ are Hikvision standards based on the original systems and optimized for CCTV applications. They further minimize the streams in typical video surveillance scenarios.
EasyIP Lite series of Hikvision cameras also provides good performance for even lower price. The series supports motion detection and video tampering detection. The cameras from the series also provide corridor mode and possibility of defining one Region of Interest (ROI).
Ceiling IP Camera: Hikvision DS-2CD1121-I (2MP, 2.8mm, 0.01 lx, IK10, IR up to 30m)
Ceiling IP Camera: Hikvision DS-2CD1321-I (2MP, 2.8mm, 0.01 lx, IR up to 30m)
Compact IP Camera: Hikvision DS-2CD1621FWD-I (2MP, 2.8-12mm, 0.01 lx, IR up to 30m, WDR)
K17282 Hikvision
DS-2CD1121-I
K17412 Hikvision
DS-2CD1321-I
K17682 Hikvision
DS-2CD1621FWD-I
The both cameras support Hik-connect service enabling full remote access to them without a need for static IP address, also via domain name with the use of a web browser.
We will also present IP CCTV devices dedicated to customers who seek the cheapest but proven and stable solutions. This group contains universal Signal IP cameras supporting H.265 video compression.
LPR - license plate recogniotion
Special Hikvision camera (for autonomous and NVR-based systems)
IP Project Camera: Hikvision DS-2CD4A26FWD-IZS/P (2MP, 2.8-12mm MOTOZOOM, 0.0027 lx, IR up to 50m, WDR (120dB), LPR, IP67)
The DS-2CD4A26FWD-IZS/P camera is dedicated for systems with license plate recognition (LPR) of vehicles moving at speeds up to 120 km/h. The identification can be set for 4 traffic lanes, but it is recommended to use it for 1 or 2 lanes. There can be imported a list of number plates divided into two categories: White list and Black list. The recognition of a vehicle with the number plate contained on one of the list can be linked with triggering an available alarm event: notification of the monitoring center, saving a photo on memory card or sending it to FTP or NAS server. If the vehicle is not on any of the lists, it will simply be registered. The camera can operate in an autonomous way, but much greater functionality is available in combination with an NVR. More info...
Recognition of license plates with the use of an IP NVR
Stereoscopic Hikvision IP camera
with intelligent image analysis and people counting function
Ceiling IP Camera with People Counting: Hikvision iDS-2CD6810F/C (2mm)
K1705 - Hikvision iDS-2CD6810F/C camera with people counting function
Hikvision iDS-2CD6810F/C K1705 is an IP camera with specialized people counting function based on intelligent video analytics. The camera should be mounted over the monitored passage where it counts the number of people moving in each direction (entering and leaving a zone and passing by). High accuracy has been achieved by using the stereoscopic effect (two lenses). The counting data is collected on the built-in flash memory. The camera can provide statistics on daily, monthly and yearly basis, in the form of graphs and raw data (xls). Integration of the camera with external software (via ISAPI) allows for increased functionality, as well as access to the statistics.
Key features:
  • separate counting of people entering, exiting, and passing by
  • high accuracy thanks to dual lens, dual CPU, support for stereo views
  • built-in flash memory storing counting data
  • microSD card slot for video recording
  • manual or automatic statistics (on daily, monthly and yearly basis)
  • possibility to integrate with external software e.g. for analysis of statistics (via ISAPI)
  • compatibility with iVMS-4200 and iVMS-4500 apps
  • power: PoE or 12 VDC
With the K1705 camera with special function implemented for people counting we will monitor visitor numbers at our stand. The local monitor will show the video from the camera, total number of visitors and quantities of people going in opposite directions (the data is collected by an external program), graph of the number of people by time, and the live view of the website banner.
Industrial switches - equipment for all conditions!
ULTIPOWER industrial switches are capable of reliable operation in harsh environmental conditions typical for many industries, like increased dust levels, high or low temperature, high humidity. Such switches should also be mounted in hermetic enclosures installed on poles or other structures located outdoors. The ULTIPOWER switches are equipped with Ethernet ports (Fast Ethernet or Gigabit Ethernet, depending on the model) for connecting IP cameras, computers etc. The industrial switches are protected by housings with IP40 ingress protection rating (against solid foreign objects greater than 1 mm in diameter). All the Ethernet PoE ports can power the connected devices (after supplying the switch with 48-50 VDC). Each of the industrial switches has been equipped with optical module or SFP port converting the transmission medium to fiber.
ULTIPOWER Ethernet industrial switches enable data transmission at rates of 10/100 Mbps or 1000 Mbps. Their RJ45 ports support auto-negotiation and Power over Ethernet (PoE) functions. The devices automatically discover PD devices (Power Device) compliant with IEEE 802.3af standard and supply power to them. This way, it is easy to power network devices located in places without access to AC lines, such as access points, IP cameras, IP phones etc. The switches have been equipped with optical converters or SFP slots for installing modules changing the transmission medium to fiber.

LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
The customer can choose the suitable model(s), depending on the required number and bandwidth of Ethernet ports (all with PoE option) and the kind of optical interface (SFP slots or built-in SC/PC ports).
You are welcome!