Suport tehnic
Detalii
High quality Tri-Shield DIPOLNET coaxial cable is E1215_200 dedicated for individual and SMATV antenna systems. It can be used for distribution of DVB-T, FM/DAB, DVB-S/S2 broadcasts (also in multiswitch systems).
It has an inner cooper conductor with a diameter of 1.13 mm and triple shield (Al/PET/AI foil (first) + 77% density braid + Al/PET/AI foil (second)).
Key features:
- complies with A+ class requirements
- 1.13 mm copper core
- low insertion loss
- excellent impedance matching
- high screening efficiency - meeting the class A++ requirements in most of the range
- 77% braid coverage
When using cables of higher flammability class, it is recommended to use TRISET series. Recommended choice of cable fire class depending on the building fire class or zone.
For more on cable fire resistance classes, read The CPR Directive - the new cable order
DIPOLNET cables are compliant with Construction Products Regulation (CPR) and EN 50575 standard that specifies reaction to fire performance requirements, test and assessment methods for cables used as construction materials.
The RG-6 Tri-Shield coaxial cable DIPOLNET E1215 complies with the EN50117 standard for shielding (class A+) in the frequency band 5-3000 MHz.
Tri-Shield Coaxial Cable DIPOLNET E1215_200 complies with the requirements of the Regulation of the Ministry of Transport, Construction and Maritime Economy on technical conditions to be met by buildings and their location of November 22, 2012, for the cabling dedicated to TV/SAT systems.
RoHS compliance declaration.
The Regulation in § 192e item 4 specifies the following requirements for coaxial cables in teletechnical systems in buildings of collective residence:
Requirements | DIPOLNET specification | |
Category RG-6 or higher | The DIPOLNET family cable is the RG-6 category cable | |
Double shield: - Al foil - ≥ 77% density braid | Triple shield: - AI foil - 77% braid - Al foil | |
Cooper inner conductor with at least 1 mm diameter | Cooper conductor with a diameter of 1.13 mm | |
Class A | Screening efficiency 0.03...1 GHz ≥ 85 dB 1...2 GHz ≥ 75 dB 2...3 GHz ≥ 65 dB | Screening efficiency 0.03...1 GHz ≥ 102 dB 1...2 GHz ≥ 100 dB 2...3 GHz ≥ 105 dB |
Transfer impedance < 5 mOhm/m | Transfer impedance ≤ 1.68 mOhm/m |
Tri-Shield DIPOLNET E1215_200 cable has 77% braid coverage to guarantee high screening efficiency and protect the transmitted signals against interference.
High quality, triple shielded RG6 coaxial cable has an inner conductor made of 1.13 mm diameter copper wire, which ensures very low insertion loss. The core dose not corrode, and the cable is not stiff.
The cable is manufactured under strict quality standards, with tight tolerances. Optimum flexibility of the sheath allows for easy cable installation in shafts, as well as installation or junction boxes.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective conduits.
In the case of parallel arrangement of many cables and long cable runs it is recommended to use cables of TRISET series. Effective screening over long distances eliminates the probability of cable crosstalk. It consists in induction of unwanted signals in neighboring cables. It is manifested on the screen by image interference: pixelosis and freezing of scenes as it occurs in the case of a weak or low quality signal.
Insertion loss in the 5-3000 MHz range
Insertion loss in the 5-3000 MHz range and Smith chart showing the impedance of the cable. The measurements were taken at two ends of 100 m cable length. Deviations from the nominal value of 75 Ohm not exceeding 1% ensure perfect impedance matching in the transmission path.
According to the EN50117 standard, coaxial cables are divided into the following classes, depending on their screening efficiency: C, B, A, A+, A++.
Classes of screening efficiency
Class\freq. range | 5-30 MHz [mOhm/m] | 30-1000 MHz [dB] | 1-2 GHz [dB] | 2-3 GHz [dB] |
C | 50 | 75 | 65 | 55 |
B | 15 | 75 | 65 | 55 |
A | 5 | 85 | 75 | 65 |
A+ | 2.5 | 95 | 85 | 75 |
A++ | 0.9 | 105 | 95 | 85 |
Price for 200m
Specificații
Tip produs | Cablu coaxial | ||
Tip | RG-6 TRI-SHIELD | ||
Producător | DIPOLNET | ||
Lungime cablu | m | 200 | |
Utilizare | Interior | ||
Clasă cablu | RG-6 | ||
Respectarea legislației naționale relevante | Da | ||
Clasă CPR | Eca | ||
Cablu cu gel | Nu | ||
Proprietăți fizice | |||
Impedanță | Ohm | 75 | |
Clasă ecranare | A+ | ||
Impedanta de transfer TI | mΩ/m | ||
Conductor | Material | Cupru | |
Diametru | mm | 1,13 | |
Dielectric | spumare | Fizic | |
Diametru | mm | 4,8 | |
scut | |||
Nr. straturi | 3 | ||
Prima folie | legat de dielectric | Nu | |
Material | Al/PET/Al | ||
Dimensiuni | μm | 10/15/10 | |
grosimea totală | μm | 41 | |
Tresă | Material | Aluminiu | |
diametrul firului | mm | 0,12 | |
Nr. de fire | buc. | 16 × 8 | |
unghi de înfăşurare | grad | 26,69 | |
acoperire împletitură | 77 | ||
A doua folie | lipit de teacă | Nu | |
Material | Al/P/Al | ||
grosime strat | μm | 10/15/10 | |
grosimea totală | μm | 41 | |
manta | Material | PVC | |
grosime | mm | 0,7 | |
Diametru | mm | 7 | |
Culoare | Alb | ||
Parametri electrici | |||
Rezistenta la 20°C | Ω/km | ≤32 (ecranare) ≤22 (conductor) | |
capacitate | pF/m | 52,5 | |
Factorul de reducere a valurilor | 80 | ||
Proprietăți mecanice | |||
Temp. funcționare | °C | -20...+70 | |
Temperatură instalare | °C | -10...+40 | |
Raza minimă de îndoire | mm | 70 | |
Greutate | kg/km | 54 | |
Ambalaj | |||
Bobina | Lungime cablu | m | 200 |