View of the amplifier

Just lever the case off...

and take it out...

to get access to the adjusting elements.

The set includes mounting screws

The view of packaging

CA-210 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 400 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF band, amplifying level can be set to fit the signal level best for each. This makes installations using a single cable to send signals from all the antennas easier to set properly.

The amplifier can be used in community installations. Due to gap between VHF and UHF band (S20-S38) it cannot be used in typical cable TV systems. The amplifier is especially useful in situations where original signal is low (it can additionally power preamplifiers).

CA-210 Amplifier is fed from internal stabilized power supply. It is not designed for the use in open spaces. It cannot be installed in wet conditions, nor near heaters. Providing natural ventilation is a must. To avoid any possible damage, power should not be provided until all the connections are made properly. The amplifier allows to feed preamplifiers with 24 V voltage, and maximum current of 55 mA, e.g. Alcad mast preamplifiers.

Example of application

See similar items: AI-200 R90450, AI-223 R90452, CA 215 R90461, AI-210 R90471