Română
Polski
English
Česky
Deutsch
Irish
Magyar
Português
Slovenský
107,67 Lei
| Preţ cu TVA | Rabat | Cant. | Validitate |
|---|---|---|---|
| 107,67 Lei | 0 % | de la 1 buc. |
Disponibil
AI-200 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 318 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF bands, the levels of signals can be equalized. This makes it easier to build installations using a single cable to distribute signals from several antennas (combined in a diplexer etc).
Detalii
Application
AI-200 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 318 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF bands, the levels of signals can be equalized. This makes it easier to build installations using a single cable to distribute signals from several antennas (combined in a diplexer etc).
The amplifier can be used in community installations. Due to gap between VHF and UHF band (S20-S38) it cannot be used in typical cable TV systems. The amplifier is especially useful in situations where the signal is strong enough for one TV receiver, but there is a need to distribute it to the next televisions. In the case the original signal is too low, there should be used other Alcad amplifiers that allow to power preamplifiers, e.g. CA-210 R90460.
Security notice for amplifier users
AI-200 Amplifier is fed from internal stabilized power supply. It is not designed for use in open spaces. It cannot be installed in wet conditions, nor near heaters. Providing natural ventilation is a must. To avoid any possible damage, power should not be provided until all the connections are made properly.
Specificații
| Tip produs | Home repeater | ||
| Model | AI-200 | ||
| Producător | ALCAD | ||
| Tip | RF TV/CATV | ||
| Utilizare | Interior | ||
| Bandă funcționare | FM/VHF/UHF | ||
| Intrari/Ieșiri | număr de intrare | 1 | |
| Intrari/Ieșiri | numărul de ieşiri | 2 | |
| Comutator DC 0/12 V | Nu | ||
| Reglaj câștig | Da | ||
| Gain parameters | |||
| Intrarea 1 | Frecvență | 40...318/470...862 | |
| Intrarea 1 | Câştig | dB | 14 în FM/FIF, 24 în UIF |
| Reglaj câștig | dB | 0...16 în FM/FIF | |
| Precorectarea caracteristicilor cablului | Nu | ||
| Specificații dispozitiv | |||
| Nivel ieșire max. | IMD3=60 dB (DIN45004B) | dBµV | 105 |
| IMD2=60 dB (EN50083-3) | dBµV | 97 | |
| Zgomot propriu | VHF | dB | <4.5 |
| Zgomot propriu | UHF | dB | <3 |
| Tip conector de semnal | F | ||
| Ieșire de test RF | Nu | ||
| Alimentare | V | AC 230/50-60 Hz | |
| Consumul de energie | W | 7 | |
| Temp. funcționare | °C | -20...+50 | |
| Dimensiuni | mm | 78 × 118 × 47 | |
| Greutate | kg | ||
