Sisteme supraveghere, reţelistică, wireless, TV, satelit, antene, cabluri

Signal standing and server RACK cabinets have been tested for compliance with the general safety requirements of the European Union Directive 2014/35/EU of February 26, 2014, by meeting the relevant requirements of EN 62368-1: 2015-03 standard.

The Laboratory of Applied Tests of the KOMAG Institute of Mining Technology ensures independent, impartial and reliable tests, due to implemented management systems, which are in accordance with the requirements of the following Standards: EN ISO/IEC 17025:2005 and EN ISO 9001:2009.

The document issued by KOMAG INSTITUTE OF MINING TECHNOLOGY in Gliwice, Poland, confirming the compliance with general safety requirements contained in the general safety requirements of the European Union Directive 2014/35/EU of February 26, 2014 and in the guidelines of the EN 62368-1:2015-03 international standard.

The cabinets have been subjected to such tests as:

Testing the protection against access to live devices with a test finger.
Mechanical strength test.

A constant 250 N thrust applied to the rear, side and top walls.
Impact test – leaving a steel ball weighing 510 g from a height of 1.3 m on each wall.

Ingress protection (IP) testing.

The certificate is valid from July 20, 2018 to July 19, 2023, and applies to the following models:

Standing RACK cabinets:

R912010 RACK 19" 32U 600x1000 mm
R912011 RACK 19" 24U 600x600 mm
R912012 RACK 19" 24U 600x800 mm
R912013 RACK 19" 32U 600x800 mm
R912014 RACK 19" 42U 600x800 mm
R912015 RACK 19" 42U 800x800 mm
R912016 RACK 19" 42U 800x1000 mm

Standing server RACK cabinets:

R9120161 RACK 19" 24U 600x800 mm
R9120162 RACK 19" 24U 800x800 mm
R9120163 RACK 19" 24U 800x1000 mm
R9120164 RACK 19" 32U 600x800 mm
R9120165 RACK 19" 42U 600x1000 mm
R9120166 RACK 19" 42U 800x1000 mm

Technical characteristics

Construction of standing cabinets:

A standing cabinet consists of the following elements:

frames: rear, front, left and right side,
removable rear panel with cable holes,
top and bottom cover with cable openings (top cover with holes for mounting four fans),
removable, lockable side panels with ventilation holes,
glass front door with ventilation holes, with lockable handle,
four rack rails for mounting devices (with the possibility of changing the spacing between the front and rear rails),
grounding connector.

Construction of server cabinets:

A server cabinet consists of the following elements:

frames: rear, front, left and right side,
removable rear panel with cable holes,
dust-protected top and bottom cover with cable openings (top cover with holes for mounting four fans),
removable, lockable side panels with ventilation holes,
perforated steel front door with ventilation holes, lockable,
four rack rails for mounting devices (with the possibility of changing the spacing between the front and rear rails, with 1 cm step),
grounding connector.

Specifications of standing RACK cabinets

Internal width	19"
Internal height [U]	R912010	32
	R912011	24
	R912012	24
	R912013	32
	R912014	42
	R912015	42
	R912016	42
External width [mm]	R912010	600
	R912011	600
	R912012	600
	R912013	600
	R912014	600
	R912015	800
	R912016	800
External depth [mm]	R912010	1000
	R912011	600
	R912012	800
	R912013	800
	R912014	800
	R912015	800
	R912016	1000
Weight [kg]	R912010	71.5
	R912011	60.5
	R912012	71.5
	R912013	89
	R912014	107
	R912015	135
	R912016	146
Color	RAL9004
Door/panels	front	glass
	side	steel
	rear	steel
Fan openings [mm]	120x120

Specifications of server RACK cabinets

Internal width	19"
Internal height [U]	R9120161	24
	R9120162	24
	R9120163	24
	R9120164	32
	R9120165	42
	R9120166	42
External width [mm]	R9120161	600
	R9120162	800
	R9120163	800
	R9120164	600
	R9120165	600
	R9120166	800
External depth [mm]	R9120161	800
	R9120162	800
	R9120163	1000
	R9120164	800
	R9120165	1000
	R9120166	1000
Weight [kg]	R9120161	73
	R9120162	85
	R9120163	97
	R9120164	97
	R9120165	128
	R9120166	155
Color	RAL7021
Door/panels	front	double, perforated steel sheet
	side	steel sheet
	rear	perforated steel sheet
Fan openings [mm]	120x120