Detalii
The PROFINO Revolution 6711 programmable amplifier is designed for shared DVB-T/T2 antenna installations (S/MATV systems) in multi-family residential buildings, residences, hotels, guest houses, holiday homes, schools, hospitals, etc.
The amplifier is dedicated for antenna systems in places with difficult reception conditions, especially where terrestrial TV signals received by antennas come from different directions and have very varied levels. The device has two programmable inputs for signals in UHF band (470-862 MHz), one input for DAB/VHF (174-240 MHz) band and one FM input (88-108 MHz), and can process 30 channels. The use of the filter amplifier allows for selective amplification of the various channels in order to equalize them. The automatic gain control (AGC) implemented in the device can balance the output signals levels despite major differences at the inputs (on the condition that the parameters of each channel are above the minimum values). The installer can freely configure the DAB/VHF and UHF inputs and optimize individual channel levels just on site, in order to provide high quality images on TV screens. PROFINO Revolution 6710 can be used as a standalone device in MATV and SMATV systems (e.g. based on multiswitches) or as a component of headends.
The device can provide power for antenna preamplifiers via its VHF/UHF inputs (12 or 24 VDC, max load of all inputs 100 mA).
LTE filter options ensure resistance to interference from LTE networks operating in 4G (>790 MHz) and 5G (>694 MHz) technology.
The amplifier can only be installed indoors.
Key features
- Channel amplifier for shared antenna systems (S/MATV)
- Automatic Gain Control (AGC)
- Can individually process 30 channels in VHF/UHF bands
- Real-time AGC on all individual channels
- Designed for terrestrial DVB-T/T2 digital television signals
- LTE filter options (4G >790MHz, 5G >694 MHz)
- Low power consumption
- Simple to install and configure
Specificații
Tip produs | Amplificator canal | ||
Nume | Profino Revolution 6711 | ||
Producător | JOHANSSON | ||
Intrare RF | număr | 4 | |
Nr. de MUX-uri acceptate | 15 | ||
Bandă funcționare | FM+VHF+2 × UHF | ||
Utilizare | Interior | ||
standard | DVB-T/T2 | ||
Funcția AGC | Da | ||
Selectivitate | dB | 35 | |
Intrare FM | Bandă frecvențe | MHz | 88...108 |
Câştig | dB | 35 | |
Max. Nivel de intrare | dBµV | 37...77 | |
Impedanță | Ohm | 75 | |
Intrare VHF | Bandă frecvențe | MHz | 174...230 |
Câştig | dB | >60 | |
Reglaj câștig | dB | AGC | |
Max. Nivel de intrare | dBµV | 45...109 | |
Impedanță | Ohm | 75 | |
Intrare UHF 1 | Bandă frecvențe | MHz | 470...862 |
Câştig | dB | >60 | |
Reglaj câștig | dB | AGC | |
Max. Nivel de intrare | dBµV | 45...109 | |
Impedanță | Ohm | 75 | |
Intrare UHF 2 | Bandă frecvențe | MHz | 470...862 |
Câştig | dB | 45, >60 | |
Reglaj câștig | dB | AGC | |
Max. Nivel de intrare | dBµV | 45...109 | |
Ieșire RF | Putere semnal | dBµV | 105 pentru 1...6 MUX-uri |
Impedanță | Ohm | 75 | |
MER | dB | 35 | |
controlul nivelului | dB | 0...15 pentru FM/VHF, 0...20 pentru FM/VHF/UHF | |
Alimentare preamplificator | V/A | 0-12 – 24/0.1 (total pt. 4 intrări) | |
General | |||
Configurare | buton+afișaj | ||
Filtru de respingere LTE | LTE 700, LTE 800 | ||
Alimentare incorporată | AC 100...240 | ||
Consumul de energie | W | 12 | |
Conversie canal | Da | ||
Temp. funcționare | °C | -5...+50 | |
Greutate | kg | 0,8 | |
Dimensiuni | mm | 59 × 165 × 217 |