Română
Polski
English
Česky
Deutsch
Irish
Magyar
Português
Slovenský
Suport tehnic
Detalii
View of the transmitter
View of the opposite side
View of the packaging
The ADT-1 transmitter cooperates with ADR-1 receiver. The set ("UTP transceiver") allows to transmit video, audio, data (e.g. RS-485) signals over longer distances (up to 2000m), via typical twisted pair cable (UTP/FTP/STP - category 5). The installer should pay attention to connecting the appropriate leads to the correct terminals: (+) to (+) and (-) to (-).
The transmitter can also cooperate with passive video transformers used for long-range video transmission via twisted pair cables.
The transmitter can also cooperate with passive video transformers used for long-range video transmission via twisted pair cables.
The device has been equipped with two LEDs:
- red - POWER ON
- green - video signal
Specifications:
| Name | ADT-1 |
| Code | M1678 |
| Power | DC 12 V / 80 mA |
| Number of video channels | 1 |
| Number of audio channels | 1 |
| Number of data channels | 2 |
| Video band | 0...9 MHz (-3 dB) |
| Audio band | 20 Hz – 20 kHz |
| Impedance of symmetrical outputs | 100 Ω |
| Impedance of video input | 75 Ω (BNC female) |
| Impedancja of audio input | 600 Ω (RCA female) |
| Symmetrical outputs - connector | RJ-45 (8 pins - 4 pairs) |
| Power connector | DC female jack (5.5/2.1 mm) |
| Weight | 120g |
| Dimensions (W x H x D) | 103 x 20 x 72 mm |
| Operating temp./ relative humidity | 0ºC ... +55ºC / <95% |