REC-109 R69958 SIGNAL PRO optical receiver is designed for use in SMATV installations and extended distribution networks based on single-mode optical fibre. Its task is to convert the WDM optical signal delivered from the TR-901 R69956 transmitter to eight SAT IF outputs in QUATRO standard (VL, VH, HL, HH) for each of the two satellite positions, and to the outputs of terrestrial radio/DVB-T2 signals.

REC-109 R69958 SIGNAL PRO receiver ensures full compatibility with typical satellite multiswitches (especially the SIGNAL PRO series) and allows to build point-to-multipoint structures using optical fibre signal distribution. Due to the high sensitivity of the optical path and the built-in output level stabilisation system, the receiver guarantees reliable operation in large building and community installations.

Thanks to the use of WDM technology and precision filters, the REC-109 receiver provides effective wavelength separation, resulting in low distortion and excellent output signal quality. The receiver's high sensitivity allows it to operate even with significant attenuation of the optical path, extending the design possibilities of installations over longer distances. The metal, robust construction protects the internal systems, ensures efficient heat dissipation and enables fault-free operation 24/7. An additional advantage is the intuitive diagnostics based on LED, which allows the installer to quickly assess the device's operating parameters and possible abnormalities. On the other hand, stabilised RF signal level eliminates differences resulting from the length of cabling or changes in optical path conditions, thanks to which the receiver guarantees uniform, repeatable parameters throughout the installation.

Optical-copper RTV/SAT installation using the professional line of SIGNAL PRO brand equipment for 256 apartments:

• satellite TV (2 satellite positions)
• terrestrial TV, radio
• distribution in 1 fibre optic fibre
• division of signal into 4 optical paths

This solution can be used in large facilities where the distance between staircases is more than a few tens of metres and you want to transmit the RTV/SAT signal in a single optical fibre. Fibre optic cable provides excellent insulation against surges. This means that any surges induced in the vicinity of the antennas will stop at the optical transmitter installed immediately behind them - all other elements of the installation are 100% protected.