RO
PL
EN
CZ
DE
IE
HU
PT
SK
ES
Detalii
The PoE switch SWPS-4-11-DIN4 is equipped with 4 RJ45 ports, 3 of which support PoE power in 802.3af/at/bt60 standards. This enables the device to act as a distribution point, allowing several receivers to be powered via a UTP cable.
The total power of the switch is 120 W and is distributed between the three PoE ports and an additional 55 V output, accessible via the DC_OUT screw connector.
The total power of the switch is 120 W and is distributed between the three PoE ports and an additional 55 V output, accessible via the DC_OUT screw connector.
Key features:
- power supply for up to 3 PoE 802.3af/at/bt60 receivers
- up to 120 W total power from the power supply
- high module efficiency >90%
- redundant power supply (ensures continuity of power supply via second module)
- embedded LR150 function increases maximum transmission distance to 150 metres
- clear operating status and power consumption indication
- easy and quick start-up without configuring parameters
- wide operating temperature range
The unit supports redundant power supply, which can be realised by connecting a second module with the same voltage, such as SWPS-4-11-DIN4 or APS-120-550-DIN4.
Thanks to the built-in LR150 (Long Range 150 m) function, stable operation of all ports up to a distance of 150 m in the 100 Mbps standard is possible together with PoE power supply. This allows the installation of cameras without the need for additional intermediate extenders.
The PoE identification standard, data transmission and power consumption are indicated by LEDs:
- LED in LAN1 port (white) - device power supply
- LED in RJ45 connectors (red) - PoE power supply active
- LED in RJ45 connectors (green) - data transmission
The switch is also equipped with a load indicator, which makes it easy to check the current power consumption:
- White - standby mode (no load)
- Green - current power consumption
- Blue - highest power consumption saved
- Red - excess of approx. 110 W (near overload condition)
Thanks to its DIN4 housing, the device can be mounted on a TH35 rail. The standarised design provides mechanical protection and facilitates integration into automation and monitoring systems. The IP20 protection level guarantees protection against external influences in indoor installation conditions.
Specificații
| Nume | |||
| Model | |||
| Utilizare | Switch PoE | ||
| Producător | ATTE | ||
| Interfețe | |||
| porturi Ethernet | număr porturi | 4 | |
| porturi Ethernet | tip porturi | Ethernet 10/100 | |
| 10/100 Mbps | 1 | ||
| PoE 10/100 MBps | 3 | ||
| Port optic | Port SFP | Nu | |
| Proprietăți PoE | |||
| PoE | Da | ||
| Standard PoE | 802.3af, 802.3at, 802.3bt 60 W | ||
| Modul extindere | Da | ||
| Proprietățile dispozitivului | |||
| Alimentare | PoE | 802.3af, 802.3at, 802.3bt 60 W | |
| Număr ventilatoare | Fără | ||
| Dimensiuni | mm | ||
| Montare | DIN (TH35) | ||
| Alimentare redundantă | Nu | ||
| Certificate | CE/FCC | ||
| Continutul pachetului | Manual, Switch | ||
| Mediul de funcționare | |||
| Temperatură | funcționare | ℃ | -25...+65 |