Cod: M76204

953,34 Lei

Preţ fără TVA	Preţ cu TVA	Rabat	Cant.	Validitate
801,13 Lei	953,34 Lei	0 %	de la 1 buc.

Disponibil

Ofertă: Analog HD Bibliotecă: SUNELL (3), HIKVISION (12), Dahua (7), Măsurare temperatură corporală (3), People counting (1), Bazele (21), Alegerea echipamentelor de supraveghere (5), Suport Tehnic (3), Supraveghere (4).

Garanție

Garanție 2 ani.

Suport tehnic

Aveți întrebări sau comentarii?

Scrieţi-ne!

Detalii

The Hikvision iDS-7204HQHI-M1/XT is a 4-channel, multi-system DVR capable of recording video from cameras: HD-TVI, AHD, CVBS and IP.
For an analog system, the DVR is capable of recording 2 MP resolution video at 15 fps and for lower resolutions it reaches 25 fps.

Key features:

HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
possibility to replace analog channels with IP in 1:1 ratio
extended IP camera mode (Enhanced IP – excludes VCA analysis)
AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
AcuSense – alarm filtering with human/vehicle classification
H.265+/H.265/H.264+/H.264 encoding
HikConnect cloud support

Support for a variety of video systems

By default, the DVR supports 4 analog cameras (HD-TVI, AHD, or CVBS signals) and 1 IP cameras (up to 6 MP). If an analog channel is unused, disabling it in the menu adds support for a new IP camera. When all analog channels are disabled, 5 IP cameras can be connected.

Enhanced IP mode

By activating the Enhanced IP mode, the number of supported IP channels is increased. 2 IP cameras up are supported (max. 6 after turning off all analog channels) to 4 MP, but the support for smart events on analog channels is disabled and the resolution of the HDMI/VGA video outputs is limited to 1080p. It can be started only while having a direct access to the DVR menu.

AI functions

The DVR can perform the following AI functions: motion detection 2.0 (4 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels).

Motion detection 2.0

The motion detection system 2.0 can analyze detection events in terms of human or vehicle detection. Thanks to that, alarm notifications are filtered and unnecessary alarms are blocked.

Face recognition

The DVR has a function to capture and analyze faces on a certain number of channels. It is possible to create libraries of faces that will later be used to search the recordings. Related actions can also be specified that will be executed in case of a correct or incorrect comparison between a detected face and a face that is in the library, such as triggering a beep in the recorder, an alarm in the monitoring center, sending an e-mail, controlling an alarm output etc. Faces, already recorded on the DVR or from an external source, can be added to the library. Recordings stored on the DVR, can be easily and quickly searched after pointing to a specific face on channels , on which the face recording and comparison function was active.

Artificial intelligence AI and AcuSense technology

Artificial intelligence plays a key role in CCTV systems. Cameras and recorders with AcuSense technology analyze the image based on a deep learning algorithm. They reflect the structure and principles of the human brain. As in the brain, learning creates connections between artificial neurons (programs) and creates a multi-layer artificial neural network. The algorithm individually analyzes model photos and recordings, looking for common features, and then creates appropriate connections. The so-called layers, responsible for detecting a specific feature, are built this way. The more layers an algorithm has, the more accurate the analysis is. Therefore, teaching with large amounts of data is crucial. Only multi-layer networks can collect information and perform appropriate actions, in particular automatic extraction and representation of features (patterns) present in the data, teaching the network for example to recognize faces, vehicle brands, animal species or incident, e.g. a fall. This model of DVR has 2 channels with AcuSense function.

On two selected analog channels, it is possible to run virtual line crossing detection (together with line crossing direction determination) and intrusion detection in a quadrant area. Events can be filtered for human or vehicle detection.

H.265 / H.265 video compression+

The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.

Sophisticated client software

The iVMS 4200 client software enables users to manage Hikvision devices in IP networks. The software enables the configuration and management of NVRs/DVRs, IP and analog cameras in hybrid systems. The iVMS 4200 utility can remotely manage up to 256 devices on up to 4 monitors. One monitor can display images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifications, two-way audio transmission, and multi-level e-maps.

The control panel of the iVMS-4200 application

Hik-Connect is a mobile application designed for cell phones based on Android and iOS operating systems. It can be used to remotely view live video from DVRs, NVRs, network cameras using the Wi-Fi, 2G or 3G and also to view recordings stored on the DVR. The application allows connectivity via IP addresses and via P2P cloud.


The start menu of the Hik-Connect app with a live view thumbnail	The live view screen

Working in the cloud

Hik-Connect is also the name of a network service intended for Hikvison devices. The service relies on P2P cloud computing for remote viewing via smartphones and tablets, and provides extensive monitoring and basic configuration options: live viewing (multiple channels), PTZ control, digital zoom, acoustic monitoring, playback of archival video, and alarm notifications (intrusion, line crossing, etc.).

Main features of the Hik-Connect service:

only basic network configuration required
no external IP address, port forwarding required
connectivity via p2p network via cloud via client app for smartphones Android, iOS
image encryption

Advanced applications for organizing and operating CCTV systems

Our library provides an overview of applications designed for installers and users of monitoring systems based on Hikvision devices.

The main window of the SADP software

SADP (Search Active Device Protocol) is a free and easy-to-use software designed to search the local network for Hikvision brand cameras and DVRs, modify network parameters and restore passwords. For detailed information on password restoration (item 8) and operation of the program, please refer to the library SADP application – a tool for organizing CCTV systems based on HIKVISION devices in a local network.

Specificații

Model
Tip produs			DVR HD Analog
Producător			Hikvision
Serie			TurboHD 5.0
Parametri
Intrări video analogice	număr		4
Intrări video analogice	Rezolutie maximă	MP	2
	Standarde suportate		multisistem (HD-TVI, HD-CVI, AHD, CVBS)
	semnal implicit		HD-TVI
	schimbabil cu IP		Da 1:1
Intrări video IP	număr în modul standard		1
Intrări video IP	cantitate după oprirea canalelor analogice		5
	număr în modul IP îmbunătățit (limită de 4 MP)		2
	Număr după oprirea canalelor analogice în modul IP îmbunătățit (limită de 4 MP)		6
	Rezolutie maximă	MP	6
Bandă funcționare	total (intrare și ieșire)	MBps	72
Înregistrare	Compresie video		H.265+/H.265/H.264+/H.264/MPEG4
Înregistrare	viteza pentru semnal implicit		15 pentru 2 MP, 15 pentru 720p, 25 pentru WD1
	viteza altor semnale HD		15 pentru 2 MP, 15 pentru 720p, 25 pentru WD1/4CIF
	rata de biți a unui singur canal video		32 kb/s – 6 MBps
	Compresie audio		G.711U
	rata de biți a canalului audio		64 Kbps
Rezoluția maximă a ieșirilor video	HDMI 1	px	1920 × 1080
Rezoluția maximă a ieșirilor video	VGA 1	px	1920 × 1080
	BNC		704 × 576 (CVBS)
Moduri de ieșire video			Parallel HDMI1/VGA1
Decodare	redare sincronă		4
HDD	numărul de interfețe SATA II		1
HDD	Capacitate maximă pe fiecare HDD	TB	10
Analiza imaginii (algoritm convențional)
Incidente de bază			Detectarea miscării, Tamper imagine, Intrare alarmă, Excepție, Ieșire alarmă
Incidente avansate			Detecție trecere linie, Detectarea intrării în zonă, Detectarea iesirii din zonă,
Analiză inteligentă a imaginii (algoritm de învățare profundă)
AcuSense	filtru alarme false	număr
Filtru om, vehicul			Detectarea mișcării 2.0, Detecție trecere linie, Detectarea intrării în zonă, Detectarea iesirii din zonă
Interfețe
USB			2
Audio bidirecțional			Da
Audio	Intrare		1, RCA (2.0 Vp-p, 1 kOhm)
Audio	Ieșire		1, RCA (linear, 1 kOhm)
Interfețe seriale			RS-485
Ethernet			1 × 1RJ45 10/100
Alții
Aplicații			Hik-Connect, iVMS-4200
Arhivare			USB, Telecomandă
Protocoale de rețea			TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, ONVIF
Ieșire sursă alimentare	DC	V	12
	DC	A	1,5
Consum de energie (fără HDD)	DC	W	18
Temp. funcționare		°C	-10 ...+ 55
Umiditate			90 sau mai puțin (fără condensare)
Dimensiuni (L × A × Î)		mm	315 × 242 × 45
Înălţime		U	1
Greutate		kg	1,16