RO
PL
EN
CZ
DE
IE
HU
PT
SK
ES
Detalii
The Etrix S-13 POE Stabiliser allows non-PoE (Power over Ethernet) devices to be powered using an 802.3af or 802.3at compliant power source. This makes it easy to connect IP cameras, door openers, Access Points or other network devices requiring standard 12 V power without the need for additional adapters. It is equipped with a high-frequency isolation transformer, providing galvanic isolation between the PoE input and the 12 V output, which increases security and noise immunity. No voltage is transmitted at the network output, only data.
Key features:
- input: IEEE 802.3af / 802.3at PoE standards, 44-57 V input voltage
- output: DC 12 V output voltage, maximum current 2 A, maximum power 24 W, DC connector 5.5 × 2.1 mm
- data transfer rate 10/100 Mbps
- galvanic separation of input and output via high-frequency isolation transformer
The maximum power at the 12 V output is 24 W and is possible when powered by a PoE 802.3at-compliant switch.
For outdoor installation, the device must be placed in a suitable enclosure.
For outdoor installation, the device must be placed in a suitable enclosure.
Specificații
| Model | |||
| Tip produs | convertor PoE | ||
| Producător | Etrix | ||
| Intrare | număr | 1 | |
| Tip conector | RJ-45 | ||
| Tensiune | DCV | 44...57 | |
| perechi PoE | , 802.3 af | ||
| Ieșire | număr | 2 | |
| Tip conector | RJ-45, Priză DC 2.1/5.5 | ||
| Tensiune DC în mufă | DCV | 12 | |
| curent DC maxim al prizei | A | 2 | |
| Tensiune conector RJ-45 | V | Fără | |
| Temp. funcționare | °C | -25 ... +40 | |
| Dimensiuni | mm | ||
Produse conexe
