Suport tehnic


Video Surge Protector HDO-1F-EXT (BNC)
HDO-1F-EXT is a high quality 1-channel video surge protector for use in a 75 Ω coaxial video line, dedicated for CCTV systems transmitting CVBS, AHD, HD-CVI or HD-TVI signals.
The EXT (extreme) series uses the latest protection means in the form of superfast automatic fuses made in MOSFET technology.
The devices of the EXT (Extreme) series have built-in three segments of surge protection operating in the right order during lightning or other incidents of surges and voltage spikes of various levels. During normal operation, the video signal circuit is not galvanically connected to the ground, which eliminates harmful ground loops and the related interference. An excessive electric charge is discharged to the ground in the initial stage of surge formation (at the rising edge), which lowers the overvoltage to a safe level. In order to discharge the surge current to the ground, the yellow-green wire should be connected straight to a good grounding system. Secondary overvoltages are eliminated by a separate circuit decoupled by a unique solution with ultra-fast MOSFET fuse and transient voltage suppressor. This results in high durability and efficiency of the device, also in the case of multiple pulses.
The idea of the protection system
Low capacitance of the protection circuits (5 pF) has minimal effect on the video signal transmission within 0~100 MHz frequency range, which is especially important in the case of the broadband AHD, HD-CVI and HD-TVI signals.
The device uses branded BNC connectors, which ensures high quality and durability of the connections, even in adverse temperature conditions.

Video Surge Protector HDO-1F-EXT (BNC)Video Surge Protector HDO-1F-EXT (BNC)
Example of extremely effective protection of an HD camera and a receiver (monitor, DVR etc.)
with two HDO-1F-EXT M17026 devices

Video Surge Protector HDO-1F PRO (BNC)Video Surge Protector HDO-1F-EXT (BNC)
Example of highly effective protection of an HD camera and a receiver (monitor, DVR etc.)
with HDO-1F-PRO M17011 and HDO-1F-EXT M17026 devices

Code M17026
Input (line) BNC-f
Output (device) Cable terminated with BNC-m
Bandwidth 100 MHz
Attenuation 0.05 dB
Overvoltage suppressors Air spark gap, gas discharge tube, Transil™, MOSFET fuse
Line to ground protection Gas discharge tube: 90 V, 2x10 kA @ 8/20 μS
Wire to wire protection Transient voltage suppressor: 6 V, 15 A @ 8/20 μS
Maximum level of overvoltage 4 kV
Capacitance of the protection circuits 1-2 pF
Operating temperature range -40˚C...+60˚C
Dimensions 86 x 24 x 31 mm (excluding the cable)


Model HDO-1F EXT
Tip produs Protecție la supratensiuni
Producător Ewimar
Parametrii de intrare număr 1
tip conector Priză BNC mamă
impedantă BNC ohm 75
Bandă funcționare MHz 0 ... 100
Parametrii de ieșire număr 1
tip conector Cable with male BNC connector
impedantă BNC ohm 75
Atenuare dB
Protecție protecție de la linie la sol Protector de gaz: 90 V, 2 × 10 kA @ 8/20 us
protecţie linie la linie Punte de protectie: 6 V, 100 A @ 8/20 us
nivelul maxim de supratensiune 4 kV
capacitatea circuitului de protecție 1-2 pF
Temp. funcționare °C -40 .. 60
Dimensiuni mm 86 × 24 × 31 mm