Cod: G77197
257,73 Lei
Preţ cu TVA Rabat Cant. Validitate
257,73 Lei 0 % de la 1 buc.
Indisponibil temporar
Ofertă: Bibliotecă: , .

Garanție

Garanție - 2 ani.

Suport tehnic

Detalii

The emergency exit button APWK-LED is designed for use in access control (AC) and intrusion and hold-up alarm (IHA) systems. It is used for the direct, emergency release of access point locks (e.g. solenoid locks or electric strikes) in the event of a controller failure or in emergency situations. It is activated by pressing the push plate, which is protected against accidental use by a transparent protective flap. The device is reset to surveillance mode using a dedicated service key (included). The button features universal NO/NC contacts and 3 independent relay outputs with a maximum load capacity of 125 V / 3 A, ensuring compatibility with a wide range of actuators. The integrated visual and audible signalling is configured using jumpers on the PCB. A two-colour LED indicates the monitoring status (green) or alarm status (red), with the red LED capable of operating in continuous, flashing or off modes. The built-in piezoelectric transducer with adjustable sound intensity offers continuous, intermittent or silent operating modes. The device’s mechanical design allows for surface-mounted or flush-mounted installation using an installation box, in accordance with the instructions in the manual.
Key features:
  • supply voltage: 12–24 V DC
  • audible alarm modes: continuous / intermittent / silent
  • volume control
  • visual indication: two-colour LED (green – monitoring / red – alarm)
  • device status indicator: mechanical activation indicator on the pressure plate
  • lock/reset: mechanical (requires a service key, supplied in the set)
  • relay outputs: 3 x NO/NC (max. load capacity 3 A)
  • installation method: surface-mounted / flush-mounted (using a mounting box)
  • material: ABS

Specificații

Model
Producător Yotogi
Sistem Controlul accesului
Tip produs Buton ieșire
material ABS
Culoare verde
Montaj Montat la suprafață, Încastrat
Parametri
Interfețe de ieșire Ieșire releu NO, NC, COM buc.
Tip contact NO, NC, COM, NO, NC, COM
Caracteristici selectate Resetați cu o cheie dedicată, Resetați cu o cheie dedicată, Indicatoare LED, Indicatoare LED
Alimentare DC V 12, 12
Grad de protecție IP24, IP24
Temp. funcționare °C -30...+70, -30...+70
Dimensiuni mm
Greutate kg