DS-KH7300EY-WTE2 is a state-of-the-art touchscreen monitor from Hikvision, designed to work with the DS-KH7300EY-WTE2/White EY series video door entry system. It allows direct audio/video conversation with people at the installed door stations. The system is operated with a transparent and intuitive graphical interface. The monitor allows you to capture a photo during call initialization and save it to a microSD card. The built-in Wi-Fi 2.4 GHz b/g/n module allows wireless connection to the Internet and remote operation via Hik-Connect application. The panel is powered by 48 VDC via 2-Wire bus using DS-KAD7060EY G74828 or DS-KAD7061EY G74830 distributors.

2-Wire HD video intercom system from the EY series is an excellent solution for upgrading an old intercom or video intercom system that uses twisted pair, paired or straight cable as the communication bus. In this system, communication and powering of devices such as door stations or monitors is done using DS-KAD7060EY G74828 and DS-KAD7061EY G74830 distributors. This is a Plug & Play system, which, once the devices are properly addressed and configured using the switches on their backsides and powered up, the whole thing starts working. Additional configuration is possible through the door station using AP (Access Point) mode. Remote operation of the system via the Hik-Connect application is possible, when using indoor monitors with WiFi interface.

Sample diagram using the Hikvision 2-Wire HD video door entry system from the EY series.

The 2-Wire HD video intercom system of the EY series is aesthetically pleasing and highly functional. The door station can be expanded with additional modules (max. 8 within 1 door station) depending on the requirements at the site. The same modules are used in the Y-series modular IP and 2-Wire video door entry system (not compatible with DS-KD-DIS). See below for a list:

The door station can be expanded with 1, 2 and 3 modular under/over frames (DS-KD-ACFx and DS-KD-ACWx), which can be combined with each other allowing to build both small and large functional systems.

Hikvision devices can be operated via mobile phones with Android or iOS using the dedicated Hik-Connect mobile application. It can be used to remotely view live video from DVR, NVR, IP cameras, door entry systems using Wi-Fi, 2G or 3G networks and also to view recorded videos. Operating video intercoms with the application provides also remote opening of the electric strike, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the subscriber. The application allows connectivity via IP addresses and via P2P cloud. Hik-Connect is also the name of the cloud service that provides access to devices in the absence of an external IP address.