Cod: E8747
214,78 Lei
Preţ cu TVA Rabat Cant. Validitate
214,78 Lei 0 % de la 1 buc.
Disponibil
Ofertă: Bibliotecă: , .

Garanție

Garanție 2 ani.

Suport tehnic

Detalii

The ZB-500/38+RAM2 non-invasive ballast mast with an adjustable mast angle in relation to the ground is intended for the installation of TV antennas, data transmission antennas and CCTV cameras. It enables installation on flat, resistant surfaces in places where interference with the structure or roof sheathing is impossible or inadvisable.
Key features:
  • base made of galvanised steel sheet thickness 3 mm, extrusion moulded
  • single frame size: 41.5 × 26.5 cm
  • base dimension when folded: 61.0 × 41.5 cm
  • galvanised mast length 0.5 m
  • continuously adjustable angle of inclination of the mast in relation to the ground 0...5°
  • the top of the mast is sealed with a plastic plug to protect the inside of the pipe from moisture
  • mast is designed to be loaded with concrete blocks with dimensions: 38 cm × 24 cm × 12 cm
  • blocks must be loaded onto the base and fastened with a plastic strap (e.g. PP strap)
The bracket is equipped with a mechanism enabling free adjustment of the pole's angle of inclination in relation to the ground 0...5°. This allows the mast to be positioned vertically on surfaces with a slight slope, facilitating proper installation and ensuring the stability of the entire structure.
Stability
The E8747 non-invasive ballast mast loaded symmetrically with two concrete blocks measuring: 38x24x12 cm (2 x 21 kg) remains stable with a side load of up to 20 kgf applied 5 cm below the top of the mast. This corresponds to a wind pressure of 30 m/s or 108 km/h (base wind speed for mountain areas according to PN-EN 1991-1-4:2008/A1:2010) on a 60 cm diameter canopy.

Specificații

Tip produs Ballast mast
Tip ZB-500/38+RAM2
Producător
Catarg inclus Da
Mast Lungime m 0,5
Mast Diametru mm 38
Material
Funcția ANR Dimensiuni cm
Funcția ANR Material galvanised steel
grosime mm
Size of a single frame cm 41,5 x 26,5
Adjustment vertical grad 0...5
Suport pentru blocuri de beton număr buc. 2
Dimensiuni posibile ale blocurilor cm 38 × 24 × 12
Folded base dimension cm 61,0 x 41,5
Weight of the set kg 5,9