Cod: E1007_500
1706,70 Lei
Preţ cu TVA Rabat Cant. Validitate
1706,70 Lei 0 % de la 1 buc.
Disponibil

Garanție

Garanţie 5 ani.

Suport tehnic

Detalii

Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [100 m]
Close-up of the Tri-Shield TRISET 302 Eca cable.
Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [100 m]
Braid coverage 77% (aluminum)
High-quality Tri-Shield TRISET 302 B2ca E1006 coaxial cable intended for both individual and collective installations. Cable with LSZH (LS0H) jacket - halogen-free insulation, used where greater safety in the event of fire is needed (tall and high-rise residential buildings, public utility buildings). In the event of a fire, these cables do not spread flame, smoke emission is very low, and the emitted gases are not corrosive. They can be successfully used in DVB-T2 digital terrestrial television and FM radio installations /DAB and multiswitch systems (terrestrial DVB-T2 and satellite DVB-S/S2).
Inner conductor made of copper wire with a diameter of 1.02 mm and a triple screen (first glued Al/PET/Al foil + 77% braiding + second Al/PET foil).
Key features:
  • compliant with the class A+ standard
  • flammability class B2ca-s1a, d1, a1
  • complies with the requirements of the MTBiGM regulation
  • 1.02 mm copper core
  • tri-shield cable - triple screen
  • made in LSZH (LS0H) jacket - halogen-free insulation
  • low attenuation
  • excellent fit
  • high shielding effectiveness - in the frequency band up to 2 GHz meets the requirement of class A++
  • min. 77% braid coverage
The high-quality, triple-shielded coaxial cable of RG6 category has the inner conductor made of copper wire with a diameter of 1.02 mm, which ensures low loss and durability. The copper wire core does not corrode and the cable is not stiff.
The TRISET 302 B2ca E1007 coaxial cable has 77% braid coverage, guaranteeing a high level of shielding and protecting the useful signal against the influence of external interference.
In the case of parallel installation of many cables and long cable sections, it is recommended to use triple-screened cables. Effective screening over long distances eliminates the likelihood of so-called cable crosstalk. It consists of inducing unwanted signals in neighboring cables. This is visible on the screen by image interference - pixelation and freezing of scenes - as is the case with a weak signal or a low-quality signal.
The optimally selected flexibility of the jacket allows for easy installation of the cable both in cable ducts and in installation boxes or mounting boxes.
The cable is manufactured under strict quality standards, with tight tolerances.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective conduits.
The Tri-Shield TRISET 302 B2ca E1007 coaxial cable meets the EN50117 standard for shielding (class A+) in the frequency band 5 - 3000 MHz.
Construction Products Regulation (CPR) – coaxial and twisted-pair cables recommended for low-current systems in multi-family buildings.
TRISET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized standard that specifies reaction to fire performance requirements, test and assessment methods for cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
The 75 Ohm TRISET 302 B2ca E1007 coaxial cable was tested by the notified body TÜV Rheinland with the number 1008 and obtained class B2ca-s1a, d1, a1 reaction to fire.
Characteristics of the TRISET 302 B2ca cable coating

For more on cable fire resistance classes, read The CPR Directive - the new cable order
According to the EN50117 standard, coaxial cables are divided into classes: C, B, A, A+, A++, depending on the screening effectiveness.
Classes of screening efficiency
Class 5-30 MHz [mΩ/m] 30-1000 MHz [dB] 1-2 GHz [dB] 2-3 GHz [dB]
C 50 75 65 55
B 15 75  65 55
A 5 85  75 65
A+ 2,5 95  85 75
A++ 0,9 105  95 85
Measurement results of the most important technical parameters.
Coupling impedance in the frequency range 5-30 MHz
and shielding of the TRISET 302 B2ca cable in the frequency range 30-3000 MHz
In the frequency band up to 2 GHz, meets the requirement of class A++
Insertion loss in the 5-3000 MHz range
Cable reflection loss in the frequency range 5-3000 MHz.
Smith chart showing the wave impedance of the cable.
Measurements taken at both ends of a 100 m section of cable. Deviations from the nominal value of 75Ω
not exceeding 1% guarantee perfect impedance matching in the entire transmission path.
The speed of signal propagation in a cable in the frequency range 5-1000 MHz.

Specificații

Tip produs Cablu coaxial
Tip
Producător TRISET
Lungime cablu m 500
Utilizare Interior
Clasă cablu RG-6
Respectarea legislației naționale relevante Da
Clasă CPR B2ca
Proprietăți fizice
Impedanță Ohm 75
Clasă ecranare A+
Impedanta de transfer TI mΩ/m
Conductor Material Cupru
Diametru mm 1,02
Dielectric spumare Fizic
Diametru mm 4,6
scut
Nr. straturi 3
Prima folie legat de dielectric Da
Material Al/PET/Al
Tresă Material Aluminiu
diametrul firului mm 0,12
Nr. de fire buc. 16 × 8
unghi de înfăşurare grad 26,69
acoperire împletitură 77
A doua folie Material Al/PET
manta Material LSZH
Diametru mm 7,0
Culoare Alb
Parametri electrici
Rezistenta la 20°C Ω/km 32.12 scut 21.91 conductor
capacitate pF/m 52,5
Proprietăți mecanice
Temp. funcționare °C -30...+70
Temperatură instalare °C -10...+40
Ambalaj
Bobina Diametru mm 370
Lăţime mm 300
Lungime cablu m 500

Filme

Compresia mufelor F şi BNC MASTER

O scurtă prezentare despre cum se compresează o mufă F pe un cablu TRISET-113 şi o mufă BNC pe un cablu RG-59

Aranjarea cablurilor într-o cutie de interconectare

Montarea şi punerea în funcţiune a unei cutii de interconectare