COŞUL MEU
Coşul este gol

WLAN, LAN

Exemple

Wireless adapter installation
(demonstration card: TP-Link TL-WN551G - PCI)
Original Polish version by Lukasz Kopciuch
The installation procedure is very similar
for any TP-Link wireless adapter/card
Wireless adapter enables communication with Access Point via electromagnetic waves in 2.4 GHz (standards 802.11 b/g) or 5 GHz (standard 802.11a) band. To start the communication, the card has to be properly installed and configured in the computer. This article describes step by step how to establish wireless connection using PCI WLAN card TP-Link TL-WN551G N2970.
Wireless PCI adapter (eXtended Range) TP-Link TL-WN551G N2970
At first the card has to be inserted into a free PCI slot in the PC (of course after switching off the computer).
View of the card placed in a PCI slot
After the PC is switched on, the message on a new hardware is displayed (it confirms that the card is inserted properly). The user does not need to click on the box - the installation will be performed with a program delivered by the manufacturer. The end of the installation and the information on new hardware will be announced by a pop-up window.
View of the system tray
To start the installation, insert the included CD into your CD/DVD drive. From the catalog on the CD-ROM (X:/TL-WN510G_550G_551G) choose the folder suitable for your operating system and run the Setup.exe program.
View of the Setup.exe folder
The installation wizard will install the device.
Then click on Next.
The installation wizard
There are available three installation options:
  • Install Client Utilities and Driver
  • Install Driver Only
  • Make Driver Installation Diskette(s)
You should choose Install Client Utilities and Driver and click Next.
Selection of installation option
The message informing about system reboot after installation appears. Click Yes.
Question on system reboot
In the next window choose the destination location for the installation files (by default: X:Program files TP-LINKTWCU). You may browse the folders by clicking on Browse, after confirmation click Next.
Selecting destination folder
The next window allows to choose Program Folder for the program icons (if you are not experienced user choose the default location).
Then click Next.
Adding program icons
Another window contains information on TWCU program that is recommended for optimum operation of the wireless card. Use of a third-party tools may result in inappropriate operation or lack of some functions. The choice is made in the next window - click Next.
Information on TWCU program
Choose between:
  • TP-LINK Wireless Client Utility (TWCU) and Supplicant ( Recommended)
  • Third-Party Supplicant
Then click Next.
Choice of configuration tool
The next message informs that the drivers and program will be installed automatically.
To confirm installation, click OK.
Information window
The setup status window informs on installation progress.
The setup status window
In the case of Windows XP (TM) the message below will appear. You should click on Continue Anyway.
Windows XP (TM) compatibility message
The last window informs on successful operations and the need of rebooting the system. Mark Yes, I want to restart my computer now and click Finish.
The message on successful operations and the need of rebooting the system
After this operation there will be two new icons on the tray (close to the clock). Double-click the one on the left (indicated by the yellow arrow).
View of the system tray
The TP-LINK Wireless Client Utility appears. There are three sub-menus available:
  • Current Status - current information on the settings.
  • Profile Management.
  • Diagnostics - information on received/sent data.
The main window of TP-LINK Wireless Client Utility
The first stage is creation of a new profile. Choose the Profile Management sub-menu and click on Scan.
"Profile Management" sub-menu
In the next window there are shown operating networks.
Window with available networks
Double-click the chosen network. The new window shows, used for creating a new profile. In the General box enter Profile Name.
The new profile window
If the network is protected, click on Security sub-menu, mark the protocol that is used, and click on Configure.
Setting security options
There will be available a specific box, according to the protocol used. The example box applies to WPA/WPA2 Passphrase protocol.
WPA/WPA2 passphrase box
Click OK to finish the task.
View of "Profile Management" window.
Now you can read in the Current Status box the set of parameters. If the new profile has been defined properly, the icons on the system tray will change - see the screenshot below.
View of the modified system tray
You can find useful the article How to configure a router
The full list of wireless adapters/cards offered by DIPOL:
  • TP-Link USB TL-WN321G 2.4GHz 54Mbit/s N2920
  • TP-Link USB (eXtended Range) TL-WN620G 108Mbit/s N2923
  • TP-Link PCMCIA (eXtended Range) TL-WN510G 54Mbit/s N2930
  • TP-Link PCMCIA (eXtended Range) TL-WN610G 108Mbit/s N2933
  • TP-Link miniPCI TL-WN562AG 2.4 &5 GHz 54 Mbit/s N2965
  • TP-Link mini PCI (eXtended Range) TL-WN662AG 2.4 &5 GHz 108 Mbit/s N2966
  • TP-Link PCI (eXtended Range) TL-WN551G N2970
  • TP-Link PCI TL-WN353GD N2971
  • TP-Link PCI (eXtended Range) TL-WN651G 108 Mb/s N2973
  • TP-Link PCI (eXtended Range) TL-WN653AG 2.4 &5 GHz 108 Mbit/s N2976
  • TP-Link USB 802.11n (draft 2.0) TL-WN821N, 300Mbit/s N3221
  • TP-Link PCMCIA 802.11n (draft 2.0) TL-WN910N, 300Mbit/s N3231
  • TP-Link miniPCI 802.11n (draft 2.0) TL-WN861N, 300Mbit/s N3261
  • TP-Link PCI 802.11n (draft 2.0) TL-WN851N, 300Mbit/s N3271
 
 
Regulamentul | Reclamaţii | Download | Cookies | SitemapToate drepturile rezervate © 1996-2016 DIPOL sp.j.