COŞUL MEU
Coşul este gol

Fibră Easy-access

Clești sertizare

Stripper fibra optica easy access VertiCASA VC-VOT
Cod: L5911
Preţ fără TVAPreţ cu TVARabatValiditate  
453,15 Lei543,78 Lei0 %
VC-VOT tool designed to cut windows in VertiCASA cables for easy access.
Stripper fibra optica easy access VertiCASA VC-VOT
Stripper-ul
Stripper fibra optica easy access VertiCASA VC-VOT
Lamele se pot înlocui
Distinguishing features:
  • A special tool for cutting a breakout window without a risk of damage to the fibers;
  • Ease of use.
The VC-VOT tool is designed to cut windows in VertiCASA cables for easy access. The tool is simple to use and does not damage the fibers.
  • VC-RC1 - 12 fibers -L7112_1
  • VC-RC1 - 24 fibers -L7124_1
  • VC-RC1 - 36 fibre -L7136_1
  • VC-RC1 - 48 fibre -L7148_1
In the case of using the VC-VOT tool for stripping the VertiCASA VC-RC1 cable with 12 fibers (L7112_1 ), the stripper has to be equipped with the included adapter. It protects the cable of small diameter against excessively deep cut and risk of damaging the fibers.
The window must be located between the two aramid strands strengthening the cable sheath. The window should have a length of 80 mm.
Installation of VertiCASA riser cables
The way of cutting access window in a VertiCASA cable. One window should be located on the top floor of the building and the second on the floor on which the subscriber is to be connected.
View of the window cut in a VertiCASA cable
The fiber designed for connecting the subscriber has to be gently pull out of the cable through the window on the top floor and cut.
The same fiber has to be gently pull out on the subscriber's floor.
Preţ fără TVAPreţ cu TVARabatValiditate  
453,15 Lei543,78 Lei0 %
 
Stripper fibra optica easy access VertiCASA VC-VOT
Cod: L5911
 
Regulamentul | Reclamaţii | Download | Cookies | SitemapToate drepturile rezervate © 1996-2016 DIPOL sp.j.