Surse de alimentare
Stabilizate în cutie
Power supply: AWZ 250 (12VDC adjust./ 5x0.5A, metal housing)
Cod: M18285
Preţ cu TVA
Rabat
Cant.
204,51 RON
0 %
View of the power supply
The stabilized power supply unit is designed to supply equipment demanding stabilized voltage of 12VDC. The linear stabilizing system incorporated in the unit provides voltage with less noise and shorter time of response to changes in comparison with a switch regulator.
The unit has 5 outputs separately fused with 500mA cut-outs. Failure (short circuit/overloading) in the circuit of any outputs will result in blowing the fuse element and disconnecting the faulty circuit from the other ones. Voltage presence across the outputs of the power supply unit is indicated by LEDs lighting at the unit front panel.
The output voltage is preset at the production stage to 12V. For installation with considerable voltage drops on resistance of the wires incoming to the consumers, it is possible to adjust the voltage level with assembly potentiometer. The power supply unit has been designed according to the EU EMC and LVD requirements
View after opening the cover
Specifications
| Name | AWZ250 |
| Code | M18285 |
| Power supply voltage | 230VAC, 50Hz |
| Output voltage range | 12V / DC; adjustable 11.5-16V |
| Transformer | 40 VA |
| Nominal output current | 2 A |
| Maximum instantaneous current | 2.5A |
| Number of outputs | 5 |
| Maximum load current | 0.5A |
| Fault protection | 0.5A quick |
| Overload protection | 0.5A quick |
| Overvoltage protection | Varistors |
| Operating temperature | 0-45°C |
| Dimensions ( W x H x D ) | 170 x 185 x 82 |
| Weight | 2.3 kg |
| Remarks | Metal housing |
Preţ cu TVA
Rabat
Cant.
204,51 RON
0 %
BIBLIOTECA
NOU ÎN BIBLIOTECĂ
RECOMANDĂRI
Community antenna (MATV system) may be defined as antenna installation where compensation of network attenuation is performed by one (central) set of amplifiers. The... mai mult »