DiSEqC Generators: Questions & Answers
Informaţiile conţinute par a fi neactualizate
Clearing up some misconceptions about DiSEqC generators and their operation.
What do they generate? Although they are called DiSEqC generates, they usually generate Tone Burst signal.
So that ToneBurst is the same as DiSEqC? Tone Burst is also called Mini DiSEqC. It only allows for the choice of completing two options, e.g. one of two inputs of a switch. Therefore it is not the same; DiSEqC 1.0 or higher is a complex set of commands enabling choice among a number of inputs of a switch, control of a positioner etc.
What is the practical difference between DiSEqC 2.0 and DiSEqC 1.0.? Version 2.0 permits 2-way communication, i.e. ensures confirmation of reception of a command. V 1.0 means one-way communication (the commands are not being confirmed).
Is it important that receiving equipment should support 2.0, or the 1.0 is quite sufficient? Nowadays most of switches or multiswitches support DiSEqC 2.0. But the theoretical possibilities of the standard are practically not utilized. Supposing that the receiving equipment will only cooperate with switches or multiswitches, there is no need for it to support DiSEqC 2.0.
Does ToneBurst have to be generated continuously like 22kHz tone, or once for each command, e.g. one impulse for choosing LNB A and next one for LNB B etc.? Tone Burst signal, similarly to DiSEqC, is generated in the form of single impulses, i.e. the controlled device stores the last received command.
We also recommend another article: Switches, combiners and diplexers used in individual satellite installations
Nou în bibliotecă
Cabinetele RACK cu montaj pe perete au fost certificate în conformitate cu cerințele de siguranță cuprinse în Capitolul II din Directiva Generală de Securitate a... mai mult »
ULTIPOWER switchurile ethernet industriale permit rate de transfer de 10/1000 Mbps sau 1000 Mbps. Porturile lor RJ45 suportă funcții ca cele de auto-negociere și PoE.... mai mult »