COŞUL MEU
Coşul este gol

Digital Satellite Meter: Horizon HD-S2
Cod: R10812
Retras din ofertă
Terrestrial TV Signal Indicator TZU-22 DVB-T Finder
View of the meter in its carrying case

Horizon HD-S2 R10812 is the latest generation measuring device used to test satellite signals broadcast in DVB-S (QPSK) and DVB-S2 (QPSK, 8PSK, APSK, DSS) standards.
This means that it can measure parameters of signals from transponders broadcasting High Definition channels. European operators of satellite platforms are increasingly turning to the more cost-effective DVB-S2 standard. It is only a matter of time when popular meters for QPSK modulation will not have any use.
Similarly to other Horizon devices, the menu is clear, intuitive, and easily navigable. The meter allows to measure signal level, Carrier-to-Noise (C/N) ratio, Bit Error Rate (BER), and show signal spectrum, constellation diagram, Modulation Error Ratio (MER). The device generates DiSEqC signal and can be operated in any lighting conditions (due to back-lit LCD display).
Distinguishing features
  • Input frequency range: 950 MHz to 2150 MHz
  • Input level range: 40 dBuV to 110 dBuV (-65 dBm to -25 dBm)
  • LNB power: 13 V (V-pol), 18 V (H-pol); 250 mA
  • Short circuit protection
  • Memory of up to 256 transponders
  • DVB-S, DVB-S2
  • C, Ku, Ka bands
  • Symbol rate range: 1MS/s to 45 MS/s
  • Measurements of C/N, BER, MER
Terrestrial TV Signal Indicator TZU-22 DVB-T Finder
General view
Terrestrial TV Signal Indicator TZU-22 DVB-T Finder
The other side view
Terrestrial TV Signal Indicator TZU-22 DVB-T Finder
Bottom view (with rechargeable battery)

Terrestrial TV Signal Indicator TZU-22 DVB-T Finder
The included accessories
Accessories
  • Leather carrying case with strap, rain cover
  • Li-Po rechargeable battery (7.2 V / 2.4 Ah)
  • AC power cord
  • Cigarette lighter adapter
  • USB cable
  • User's manual
The user can load a list of satellites/transponders into the memory of the meter. The list is available at this site. After following the instructions from that site, the user can save the list on the PC as an .exe file. The file can be then copied to the memory of the meter without an additional software.
The measurements made with the meter can be recorded on a PC using Horizon Log Reader utility. The files can be saved in CSV format and read by all the popular office suites.
Notice!!!
  • if the meter is to be unused for a period longer than 2 weeks, disconnect the battery by taking out the plug under the flap in the meter housing,
  • the first charge of the battery must be carried out at least for 24 hours.
The fully charged battery of the device allows for approximately 6 hours of operation.
Specifications:
NameHorizon HD-S2
CodeR10812
Input frequency range
950...2150 MHz
Input level range
-65...-25 dBm
Symbol rate range1 - 45 MS/s
Memory capacity (transponders)
256
PC interface
USB
Rechargeable battery
Li-Po 7.2 V / 2.4 Ah
Battery charge time (from 230 VAC)ca. 4 h
Battery operating time
ca. 6 h

 

Retras din ofertă
 
Digital Satellite Meter: Horizon HD-S2
Cod: R10812
 
Regulamentul | Reclamaţii | Download | Cookies | SitemapToate drepturile rezervate © 1996-2016 DIPOL sp.j.