COŞUL MEU
Coşul este gol

INFO

Expoziţii

DIPOL la ENERGETAB 12-14 Sept. 2017
Energetab held in Bielsko-Biala, Poland, is an international energy trade show. In 2016, the fair hosted over 700 exhibitors from 22 European and Asian countries. The fair exhibitions occupied almost 4 hectares. The number of visitors from Poland and abroad reached 20,000.

At Energetab 2017, DIPOL will present a number of new products for a wide variety of customers. First of all, it will be video surveillance systems based on modern megapixel analog cameras (Hikvision) and IP solutions (Hikvision, Signal, Sunell). The range of products will meet the needs of large installation companies as well as installers building small CCTV systems with several cameras. The most interesting products will certainly be analog cameras with impressive resolution of 5 MP.

We will also show fiber optic systems, solutions for transmission of video and Ethernet signals via various media, industrial network devices. As usual, we will offer equipment supporting the use of GSM/LTE services, as well as a complete range of products for individual and shared antenna systems (MATV/SMATV). Our sales representatives and engineers will give advice on the implementation of telecommunication installations in buildings.
Each refresh of the website (F5) shows the current number of visitors to our stand.
The data from the camera is updated every single minute.
Stereoscopic Hikvision IP camera with intelligent image analysis and people counting function
Ceiling IP Camera with People Counting: Hikvision iDS-2CD6810F/C (2mm)
K1705 - Hikvision iDS-2CD6810F/C camera with people counting function
Hikvision iDS-2CD6810F/C K1705 is an IP camera with specialized people counting function based on intelligent video analytics. The camera should be mounted over the monitored passage where it counts the number of people moving in each direction (entering and leaving a zone and passing by). High accuracy has been achieved by using the stereoscopic effect (two lenses). The counting data is collected on the built-in flash memory. The camera can provide statistics on daily, monthly and yearly basis, in the form of graphs and raw data (xls).
An example of traffic supervision: image from the camera, counters of people (total number and numbers of people moving in opposite directions (data collected by external program), time chart.
Key features:
  • separate counting of people entering, exiting, and passing by
  • high accuracy thanks to dual lens, dual CPU, support for stereo views
  • built-in flash memory storing counting data
  • microSD card slot for video recording
  • manual or automatic statistics (on daily, monthly and yearly basis)
  • possibility to integrate with external software e.g. for analysis of statistics (via ISAPI)
  • compatibility with iVMS-4200 and iVMS-4500 apps
  • power: PoE or 12 VDC
HDTVI 5 MP systems - unparalleled quality of analog video monitoring
High definition (HD) systems have become standard solutions in video surveillance. HD-TVI (High Definition Transport Video Interface) and AHD (Analog High Definition) systems can offer high resolution video (up to 5 MP) for costs comparable with the obsolete analog solutions based on CVBS equipment. The key to the success of these systems have been the connection of advantages of analog video technology (ease of installation and configuration, high compatibility of devices of different manufacturers) with high resolutions characteristic for IP systems, along with increased resistance to interference.
The latest version 3.0 of HD-TVI system supports 5 MP image resolution. Thanks to higher resolution of such systems, they can either employ a fewer number of cameras (each camera with wide viewing angle can cover a larger area) or provide more detailed surveillance information. The live video is not compressed (compression is necessary only for recording), so it is more crisp compared with IP cameras, as well as has no latency.
Key features of HD-TVI 3.0 systems:
  • image resolutions up to 5 MP at 20 fps
  • compatibility with AHD cameras
  • maximum transmission distance longer than in the case of CVBS (RG-59 cable: 800 m for 1080p video)
  • HDTVI 3.0 DVRs support efficient H.264+ codec (lower bit rates minimizing disk space consumption)
  • HDTVI 3.0 DVRs are equipped with a range of video outputs:
    • CVBS - compatibility with legacy CVBS monitors and TV systems
    • HDMI - support for monitors/televisions with resolutions up to 4K
    • VGA - support for VGA monitors with resolutions up to 2K
  • all varifocal lenses of HDTVI 3.0 cameras are of motozoom type
HD-TVI TURBO HD 3.0 Camera Hikvision DS-2CE16H1T-IT3Z (compact, 5MP, 2.8-12 mm motozoom, 0.01 lx, IR up 40m)
M75771 - compact camera Hikvision DS-2CE16H1T-IT3Z with 5 MP video resolution and motozoom lens
Taking into account industrial applications, the big advantage of the HD-TVI and AHD devices is the use of coaxial cables as the transmission medium. Many facilities are equipped with such wiring (all having older analog video surveillance systems), and the migration to systems based on computer twisted pair cables or optical fibers could be too costly or troublesome. In relation to IP systems, the new analog solutions allow for longer transmission links without intermediate devices (1080p, RG6 - up to 800 meters, compared to 100-meter-long Ethernet connections). Alternatively, the HD-TVI or AHD signals can also be transmitted via twisted pair cables over distances up to 400 meters (using passive transformers - baluns), or via optical fibers up to 20 kilometers - using dedicated video-converters.
DIPOL offers complete ranges of HD-TVI and AHD products. It means a wide variety of cameras with different parameters, placed in various types of housings, suitable DVRs, and multiple accessories, also for changing the transmission medium. The visitors at Energetab will have the opportunity to familiarize themselves with the advantages of the new systems and to compare the quality of images from selected cameras.
New series of Hikvision IP cameras:
Easy IP 3.0 and Easy IP Lite
The new series of EasyIP 3.0 cameras provides high quality video for affordable price. Thanks to Dark Fighter (Ultra-low-light) technology, so far available only in special series, the devices are able to render colors and details in low-light environments much more accurately than other cameras at similar price level. The integrated VCA video analytics functions, such as face detection, detection of intrusion, line crossing, new (left) or disappearing objects, allow for implementations of very advanced projects.
Ceiling IP Camera: Hikvision DS-2CD2135FWD-IS (3MP, 2.8mm, 0.005 lx, IR up to 30m, WDR, IK10, Audio IN/OUT, H.265/H.264)
Compact IP Camera: Hikvision DS-2CD2035FWD-I (3MP, 2.8mm, 0.005 lx, IR up to 30m, WDR, H.265/H.264)
Compact IP Camera: Hikvision DS-2CD2T55FWD-I5 (5MP, 2.8mm, 0.01 lx, IR up to 50m, WDR, H.265/H.264)
K17294 Hikvision DS-2CD2135FWD-IS
K17593 Hikvision DS-2CD2035FWD-I
K17825 Hikvision DS-2CD2T55FWD-I5
Easy IP 3.0 cameras implement several video compression methods, H.265+, H.265, H.264+, H.264, MJPEG. Compared with H.264, H.265 standard can reduce by half the data stream, which translates into proportional savings of the disk space or extended data retention time. H.265+ and H.264+ are Hikvision standards based on the original systems and optimized for CCTV applications. They further minimize the streams in typical video surveillance scenarios.
EasyIP Lite series of Hikvision cameras also provides good performance for even lower price. The series supports motion detection and video tampering detection, but does not have analytic features. The cameras from the series also provide corridor mode and possibility of defining one Region of Interest (ROI).
Ceiling IP Camera: Hikvision DS-2CD1121-I (2MP, 2.8mm, 0.01 lx, IK10, IR up to 30m)
Ceiling IP Camera: Hikvision DS-2CD1321-I (2MP, 2.8mm, 0.01 lx, IR up to 30m)
Compact IP Camera: Hikvision DS-2CD1621FWD-I (2MP, 2.8-12mm, 0.01 lx, IR up to 30m, WDR)
K17282 Hikvision DS-2CD1121-I
K17412 Hikvision DS-2CD1321-I
K17682 Hikvision DS-2CD1621FWD-I
The both series are supported by Ezviz and Hik-connect services. Ezviz (EasyVision) allows users to access video from the cameras via the Internet, without forwarding router ports. Hik-Connect service provides remote access to the devices in the case of dynamic IP addresses, or allows for the use of domain names in web browsers.
===We will also present IP CCTV devices dedicated to customers who seek the cheapest but proven and stable solutions. This group contains universal Signal IP cameras supporting H.265 video compression.==
Sunnel ECO is a new budget series of cameras with continually increasing number of models with fixed and varifocal lenses, both in compact (bullet) and ceiling (dome) housings. Parameters of the cameras along with video enhancement functions ensure good results even in difficult lighting conditions. Thanks to corridor mode, they can effectively monitor areas with large disproportion between height/depth and width of the scene (corridors, very high rooms).
Optical fiber - the optimum transmission mediumin any kind of industry Signal Fire AI-7 fusion splicer
Fiber optic cabling is widely used in industrial plants, where there is a lot of electromagnetic interference from various machines, engines, high-voltage lines etc. Aside from the complete immunity to such interference, optical fibers guarantee galvanic insulation between connected devices - there is no risk of damages caused by voltage differences between network segments or by a transfer of voltage surges.
DIPOL is successively launching solutions for fiber optic systems that can be used both by large installation companies operating in this field and by installers who deal with fiber optic solutions occasionally. The latest offered product is Signal Fire AI-7 fusion splicer L5880 combining affordable pricing and technological solutions reserved for top-notch devices.
Fusion Splicer: Signal Fire AI-7 (with toolbox and tools)
Fusion splicer Signal Fire AI-7 L5880
Signal Fire AI-7 employs core alignment technology (there is option of cladding alignment) that ensures minimum attenuation of the splices. Fiber ends are positioned by 6 stepper motors from Siemens, which is an absolute exception in this price category. The splicer can be used both for deployment of hundred-kilometer-long fiber optic trunks and in FTTH systems requiring short point-to-point connections, in LAN installations and fiber-based video surveillance systems. The AI-7 model is controlled by a quad-core processor providing fast response times (the splicer is ready to work after 3 seconds) and ensuring short splicing and sleeve heating operations. The splicer is one of the fastest devices of its kind currently available on the market and the fastest in its price class.
A unique feature of the kit is the toolbox made of high quality plastics,
containing all the necessary tools, power supply and accessories.
At our stand, visitors had the opportunity to familiarize themselves with technical details concerning the fusion splicer.
NETSET - twisted-pair cables compliant with CPR
CAT 6A U/FTP Shielded Cable: NETSET U/FTP 6A [500m], indoor
NETSET U/FTP 6A E1616
All NETSET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire. On the occasion of Energetab, we introduce new CAT 6A cable, covered like all NETSET cables by a 15-year warranty
Industrial switches - equipment for all conditions!
ULTIPOWER industrial switches are capable of reliable operation in harsh environmental conditions typical for many industries, like increased dust levels, high or low temperature, high humidity. Such switches should also be mounted in hermetic enclosures installed on poles or other structures located outdoors. The ULTIPOWER switches are equipped with Ethernet ports (Fast Ethernet or Gigabit Ethernet, depending on the model) for connecting IP cameras, computers etc. The industrial switches are protected by housings with IP40 ingress protection rating (against solid foreign objects greater than 1 mm in diameter). All the Ethernet PoE ports can power the connected devices (after supplying the switch with 48-50 VDC). Each of the industrial switches has been equipped with optical module or SFP port converting the transmission medium to fiber.
ULTIPOWER Ethernet industrial switches enable data transmission at rates of 10/100 Mbps or 1000 Mbps. Their RJ45 ports support auto-negotiation and Power over Ethernet (PoE) functions. The devices automatically discover PD devices (Power Device) compliant with IEEE 802.3af standard and supply power to them. This way, it is easy to power network devices located in places without access to AC lines, such as access points, IP cameras, IP phones etc. The switches have been equipped with optical converters or SFP slots for installing modules changing the transmission medium to fiber.

LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
The customer can choose the suitable model(s), depending on the required number and bandwidth of Ethernet ports (all with PoE option) and the kind of optical interface (SFP slots or built-in SC/PC ports).
Some pictures from the previous event
 
 
Regulamentul | Garanție | Reclamaţii | Download
| Cookies | Politica de confidentialitate Toate drepturile rezervate © 1996-2024 DIPOL sp.j.